trying to figure something out (uppipe swap)
#1
Registered User
Thread Starter
Join Date: Mar 2005
Location: Killadelphia PA
Posts: 17
Car Info: '05 WRX Wagon
trying to figure something out (uppipe swap)
i have an '05 wrx and am planning to install an sti uppipe. the sti piece doesn't have a hole for the egt sensor
what do i do with the egt sensor? (i.e. let it hang, unplug it, tap a hole for it, etc?)
also, as far as i understand the o2 sensor is not on the actual pipe, but somewhere else, in all the pic i've seen i can't figure out where (i just want to know before i go tearing apart the car)
help is much appreciated
-Sergei
what do i do with the egt sensor? (i.e. let it hang, unplug it, tap a hole for it, etc?)
also, as far as i understand the o2 sensor is not on the actual pipe, but somewhere else, in all the pic i've seen i can't figure out where (i just want to know before i go tearing apart the car)
help is much appreciated
-Sergei
#2
Registered User
iTrader: (1)
Join Date: Feb 2003
Location: How do you swap an RSTi?
Posts: 1,020
Car Info: 2001 Impreza 2.5RS(Ti)
Some of the STi up pipes have bungs and some don't. Just ask whoever you're buying it from wether it has one or not. I personally prefer to have the O2 sensor plugged in, rather than a cel fix. It's a good idea to use some sort of thread lock on the O2 sensor when you reintsall...
#4
Registered User
Thread Starter
Join Date: Mar 2005
Location: Killadelphia PA
Posts: 17
Car Info: '05 WRX Wagon
Originally Posted by mmboost
you take out the sensor all together and show a 2.2k @ 1/4w resistor across the harness.
so egt sensor=o2 sensor? or what? i'm fairly confuzzled.
#5
an egt sensor is what is in the wrx uppipe has. and the sti catless uppipe that you are planning to put on does not have a provision for an egt probe. just put in the resistor that mmboost suggested and you'll be fine running without the egt sensor in place.
#6
Registered User
Thread Starter
Join Date: Mar 2005
Location: Killadelphia PA
Posts: 17
Car Info: '05 WRX Wagon
Originally Posted by senortighto
an egt sensor is what is in the wrx uppipe has. and the sti catless uppipe that you are planning to put on does not have a provision for an egt probe. just put in the resistor that mmboost suggested and you'll be fine running without the egt sensor in place.
#7
hi, i had the exact same question, 05 wrx with a sti uppipe, no egt bung
link https://www.i-club.com/forums/engine-power-ej25t-sti-2006-wrx-90/04-05-uppipe-92510/
excellent step-by-step for the egt resistor fix
https://www.i-club.com/forums/engine-power-ej20t-pre-2006-wrx-jdm-60/resistor-mod-cel-fix-code-p0546-93401/
link https://www.i-club.com/forums/engine-power-ej25t-sti-2006-wrx-90/04-05-uppipe-92510/
excellent step-by-step for the egt resistor fix
https://www.i-club.com/forums/engine-power-ej20t-pre-2006-wrx-jdm-60/resistor-mod-cel-fix-code-p0546-93401/
Thread
Thread Starter
Forum
Replies
Last Post
TomaSK
Engine/Power - EJ20T (pre-2006 WRX and JDM)
12
01-19-2008 10:12 AM
StankFootZ
Bay Area
23
07-16-2003 11:30 PM