Sti TMIC
#4
VIP Member
iTrader: (4)
Join Date: Jul 2004
Location: Yokohama, Japan
Posts: 4,143
Car Info: Ver IV STi Wagon
The samco hose kit most likely will not work.
Just put STi intercoolers on both an 02 and an 06.
You will need a longer "L" hose and a longer hose that goes from the intake manifold to the intercooler.
The info I went by is from NASIOC:
"On an 05 I did:
From http://www.subarugenuineparts.com/
STi Air Splitter 2004-2005 $69.95
STi Scoop Duct / Bellows 2004 $29.75
STi Hood Scoop - 2004-2005 Model Painted to Match $190.00
Plus $1.50 EACH for 17 of the little plastic clips for the bellows
and $2.50 for some 1/8" weather stripping(the stock splitter had some on it, and the new one didn't, so i just replicated it.
And from http://www.hosetechniques.com/catalo...Gloss%20Finish
50.275-300-110 $10.50 (2.75" ID, 3" long)
56.200-418-110 $38.25 (2" ID, leg are 4.18" from center of bend)
I also got the suggested T-bolt clamps."
http://forums.nasioc.com/forums/showthread.php?t=952204
Hope that helps you.
Just put STi intercoolers on both an 02 and an 06.
You will need a longer "L" hose and a longer hose that goes from the intake manifold to the intercooler.
The info I went by is from NASIOC:
"On an 05 I did:
From http://www.subarugenuineparts.com/
STi Air Splitter 2004-2005 $69.95
STi Scoop Duct / Bellows 2004 $29.75
STi Hood Scoop - 2004-2005 Model Painted to Match $190.00
Plus $1.50 EACH for 17 of the little plastic clips for the bellows
and $2.50 for some 1/8" weather stripping(the stock splitter had some on it, and the new one didn't, so i just replicated it.
And from http://www.hosetechniques.com/catalo...Gloss%20Finish
50.275-300-110 $10.50 (2.75" ID, 3" long)
56.200-418-110 $38.25 (2" ID, leg are 4.18" from center of bend)
I also got the suggested T-bolt clamps."
http://forums.nasioc.com/forums/showthread.php?t=952204
Hope that helps you.
#6
Registered User
iTrader: (1)
Join Date: Aug 2006
Location: Seattle
Posts: 31
Car Info: 2004 wrx wagon
i used the stock sti tmic y-pipe and the stock wrx intake manifold hose. connected everything up and left the tmic resting on top of the wrx bracket (won't bolt down cuz of the short hoses), but it ain't moving anywhere even if i give it a good pull. no problems so far (around 5k miles). i do want the sti air spilter tho.
Thread
Thread Starter
Forum
Replies
Last Post
WRXGONE
Used Aftermarket Car Parts For Sale
5
11-26-2004 12:11 PM
iNfEk
Engine/Power - EJ20T (pre-2006 WRX and JDM)
1
02-16-2004 01:16 PM
K2Skier
Engine/Power - EJ20T (pre-2006 WRX and JDM)
0
03-29-2003 07:00 AM