Engine/Power - EJ20T (pre-2006 WRX and JDM) There is replacement for displacement, it is forced induction - OEM 2.0 liter turbo engines in the USDM WRX. 90-94 Legacy Turbo EJ22 turbo engines can also be discussed here.

stage 2 crank hp

Thread Tools
 
Search this Thread
 
Old 09-10-2006 | 11:29 AM
  #1  
TurnWRX's Avatar
Thread Starter
Registered User
iTrader: (3)
 
Joined: Jun 2003
Posts: 6,641
From: CA
stage 2 crank hp

I recently got dynoed on a mustang dyno and churned out 200 whp. What does that equate to in terms of crank hp?
Old 09-10-2006 | 10:31 PM
  #2  
Subie do's Avatar
Registered User
 
Joined: Mar 2006
Posts: 1,136
From: Seattle WA.
Car Info: 05 WRX 4EAT (VF34'd and FMIC'd)----sold :(
Cobb rated the WRX M/T at 285hp.
http://cobbtuning.com/wrx/power-s.html#Stage2
Old 09-11-2006 | 02:38 PM
  #3  
MO REX's Avatar
VIP Member
iTrader: (2)
 
Joined: Dec 2003
Posts: 1,245
From: St. Louis MO
Car Info: 02 PSM WRX
Cobb claims 285 HP at the flywheel (224 at the wheels on a Mustang dyno) so I would guess that would put you somewhere around 260 at the flywheel. What supporting mods are you running, what octane fuel were you running, what was the outside temp and did you have the car dynoed right after an ecu reset?

Just curious since you saw such a low # and since I'm at Cobb stage 2 also.

BTW, what year WRX do you own?
Old 09-11-2006 | 07:15 PM
  #4  
TurnWRX's Avatar
Thread Starter
Registered User
iTrader: (3)
 
Joined: Jun 2003
Posts: 6,641
From: CA
Originally Posted by MO REX
Cobb claims 285 HP at the flywheel (224 at the wheels on a Mustang dyno) so I would guess that would put you somewhere around 260 at the flywheel. What supporting mods are you running, what octane fuel were you running, what was the outside temp and did you have the car dynoed right after an ecu reset?

Just curious since you saw such a low # and since I'm at Cobb stage 2 also.

BTW, what year WRX do you own?
91 octane California Costco gasoline

03 wrx, just your basic stage 2

temp was like 85-90 degrees at time of dyno
Old 09-12-2006 | 06:32 PM
  #5  
WRX409's Avatar
Registered User
 
Joined: Jul 2006
Posts: 1,069
From: Allentown,PA
Car Info: 04 WRX
Originally Posted by MO REX
Cobb claims 285 HP at the flywheel (224 at the wheels on a Mustang dyno) so I would guess that would put you somewhere around 260 at the flywheel. What supporting mods are you running, what octane fuel were you running, what was the outside temp and did you have the car dynoed right after an ecu reset?

Just curious since you saw such a low # and since I'm at Cobb stage 2 also.

BTW, what year WRX do you own?
Those numbers are just about right.
Cobb does rate it at the flywheel.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
KTW
Engine/Power - EJ20T (pre-2006 WRX and JDM)
7
07-12-2004 07:33 PM
casualsurfer
Engine/Power - EJ20T (pre-2006 WRX and JDM)
9
05-03-2004 03:24 PM
Cend_wrx
Engine Management
9
04-05-2003 12:03 AM
mattr762
Subaru General
1
03-26-2003 11:47 AM
pillaka
Aftermarket Forced Induction - Turboed factory NA engines
29
12-01-2002 01:14 PM



Quick Reply: stage 2 crank hp



All times are GMT -7. The time now is 09:33 AM.