short or long kartboy hangers for greddy evo??
#2
i had kartboy exhaust hangers holding up my greddy evo for over a year and now my muffler has a hole in it from the hangers being too stiff.
friend of mine had the same thing happen to his hks exhaust using kartboy hangers.
my opinion, they are too stiff and don't allow any movement so choose carefully!
friend of mine had the same thing happen to his hks exhaust using kartboy hangers.
my opinion, they are too stiff and don't allow any movement so choose carefully!
#5
Registered User
iTrader: (7)
Join Date: Nov 2002
Location: San Jose-near milpitas
Posts: 820
Car Info: 03 Wrx black sedan + 2013 BRZ
Originally posted by v rod
i had kartboy exhaust hangers holding up my greddy evo for over a year and now my muffler has a hole in it from the hangers being too stiff.
friend of mine had the same thing happen to his hks exhaust using kartboy hangers.
my opinion, they are too stiff and don't allow any movement so choose carefully!
i had kartboy exhaust hangers holding up my greddy evo for over a year and now my muffler has a hole in it from the hangers being too stiff.
friend of mine had the same thing happen to his hks exhaust using kartboy hangers.
my opinion, they are too stiff and don't allow any movement so choose carefully!
Jason
#6
I've had kartboys on for a year with no issues. I'm trying out the long kartboys right now. So far so good. I can kinda see how the hangers being too stiff might over time develop some undue stress somewhere...
#7
Former Sponsor
iTrader: (39)
Originally posted by Wrxneffect
I just want to know how you got a hole in your muffler? I don't get how having stiff exhaust hangers causes the muffler to get a hole? Do the stiffend kartboy exhaust hangers hold the exhaust to close to something so there is rubbing? Or do you mean that you have an exhaust leak at one of the junctions between the exhaust and the cat?
Jason
I just want to know how you got a hole in your muffler? I don't get how having stiff exhaust hangers causes the muffler to get a hole? Do the stiffend kartboy exhaust hangers hold the exhaust to close to something so there is rubbing? Or do you mean that you have an exhaust leak at one of the junctions between the exhaust and the cat?
Jason
Mike
(510) 487-4447
www.mpjperformance.com
www.gb-motorsports.com
#9
VIP Member
iTrader: (9)
Join Date: Nov 2003
Location: Seattle
Posts: 773
Car Info: 2004 WRBlue WRX sedan
I can understand how too stiff hangars might cause more stress on an axleback, however i'm not sure how a hole could be caused. If i got a hole, i'd be more concerned with the muffler/hanger/weld quality than blame the hangers.
Thread
Thread Starter
Forum
Replies
Last Post
Jrocko
Hawaii Classifieds
0
03-26-2011 12:42 PM
SG5
NorCal Classifieds
0
10-19-2006 06:16 PM
chubs22
NorCal Classifieds
0
08-08-2006 07:41 PM