a question about crankcase breathing
#1
Registered User
Thread Starter
Join Date: Feb 2003
Location: busy writing log of best roads in CA.
Posts: 568
Car Info: 2002 WRX Sedan
a question about crankcase breathing
Related to my IC hose install today......when I removed the factory Y-hose, it was a little oily inside....not dripping, but coated with a film. And the intercooler had a light oily film inside where the aluminum elbows bolt on the underside. I imagine this is somewhat normal (engine has 35K on it, is stock, runs well....gets 22-23mpg on the average), but is there a way to improve the factory breather setup in an effort to REDUCE the amount of oil mist in the intake? (promotes detonation, as oil lowers the octane of the fuel mixture)
Or am I beating this motor within inches of its life?
Or am I beating this motor within inches of its life?
#4
Guest
Posts: n/a
Oil Catch Tank part#12003506-10 Billet Aluminum Oil Catch Tank. w/ hoses and fittings $104.00
go to to http://www.greddy.com/onlineshop/ and search for p/n # 12003506-10
that will stop bypass oil into your intercooler / intake
go to to http://www.greddy.com/onlineshop/ and search for p/n # 12003506-10
that will stop bypass oil into your intercooler / intake
#5
www.hopupracing.com Helix oil catch can for $75 free shipping
Thread
Thread Starter
Forum
Replies
Last Post
rich728
Engine/Power - EJ25T (STI and 2006+ WRX)
6
10-21-2004 04:38 PM