Planning on a Borla Hush? (which Kartboy hangers?)
#2
VIP Member
iTrader: (4)
Join Date: Jul 2004
Location: Yokohama, Japan
Posts: 4,143
Car Info: Ver IV STi Wagon
Not sure if you really need the hangers.
I had a Hush on my wagon and it rubbbed a bit towards the end....I added the stiffer Kartboy mounts (the hard rubber things whose name escapres me) They were just a bit longer than the stock rubbers, and harder. Kept the exhaust away fro mthe underbelly just enough to stop the rubbing.
I had a Hush on my wagon and it rubbbed a bit towards the end....I added the stiffer Kartboy mounts (the hard rubber things whose name escapres me) They were just a bit longer than the stock rubbers, and harder. Kept the exhaust away fro mthe underbelly just enough to stop the rubbing.
#3
Registered User
iTrader: (7)
Join Date: Dec 2002
Location: Sacramento CA
Posts: 10,029
Car Info: 02 Impreza WRX sedan
You might try installing the Hush with the stock rubber hangers first to see if there is a problem when you drive the car. If there is enough clearance at the rear of the car and the Hush doesn't hit when it moves from side to side, you can probably use the standard length hangers. The extra long Kartboy hangers are either 3/4" or 7/8" longer, if I recall correctly, and will give you a lot more clearance. I use the standard length Kartboys with my Strömung 3" catback and it works out fine. I think you will need 4 hangers - one for the front of the catback and two for the rear near the muffler. I think there is one more at the mid-pipe but it's hard for me to remember. I ordered four hangers and don't recall having any left over.
--
0==WW==0
"…axles of evil…" - george w. bush
--
0==WW==0
"…axles of evil…" - george w. bush
Thread
Thread Starter
Forum
Replies
Last Post
SG5
NorCal Classifieds
0
10-19-2006 06:16 PM
06scooby
Ongoing Projects
10
10-06-2006 10:47 AM
chubs22
NorCal Classifieds
0
08-08-2006 07:41 PM