over heating
#1
over heating
i just installed a vf22 turbo, sti inj., utech, spark plugs, and a fuel pump. we took it out on a drive and it started to get real hot. ya i know that i lost some coolant when we took off the old turbo but i put some in the over flow tank but dont think its filling back up though that .please help very puzzled .
some one told me to burp the system but i dont know what they exactly mean by that.
__________________
some one told me to burp the system but i dont know what they exactly mean by that.
__________________
Last edited by scapy2; 08-01-2004 at 05:46 PM.
#2
Registered User
Join Date: Feb 2004
Location: The Hunted Forest
Posts: 720
Car Info: Mazda Protege '02 (Wishing protege has AWD and a H6 twin turbo)
When the car is cold and i mean dead cold just open the radiator cap and start the car this should get any bubles to the top. Fill her up and watch your levels with the cap off.
When you get all your bubbles out put the cap back on and take a test run.
Anyone with a better idea? i'm open to them
When you get all your bubbles out put the cap back on and take a test run.
Anyone with a better idea? i'm open to them
#4
i think i got it . i filled it up and then started the car let it get hot while adding some (seen lots of bubbles) and then drove the car for about 20 miles or so the temp. didnt go up any more then before the swap. now its time to get it tuned and see what #s i get out of it now. thanks for all your help guys.
Thread
Thread Starter
Forum
Replies
Last Post
mistaanime
Engine/Power - EJ20T (pre-2006 WRX and JDM)
8
05-21-2009 12:00 PM
waren
Engine/Power - non turbo (All non turbo Imprezas)
6
03-19-2003 10:41 PM