How to do CEL fix for catless uppipe?
#1
Registered User
Thread Starter
Join Date: Nov 2002
Location: Milpitas, CA
Posts: 206
Car Info: Aspen White GDA
How to do CEL fix for catless uppipe?
So I got the STI uppipe installed. There's no more EGT sensor and I'm going to do the 22kohm resistor thing. But I don't know how to do.
My guess is I need to chop off the adaptor of the sensor wire(what was originally connected to the EGT sensor), and connect the resistor in between the wires. Am I right or wrong?
My guess is I need to chop off the adaptor of the sensor wire(what was originally connected to the EGT sensor), and connect the resistor in between the wires. Am I right or wrong?
#4
Originally posted by Nate0125RS
With the resistor for my Perrin uppipe, I just disconnected the wiring harness of the EGT and put the resistor in the female end of the connection. No CEL.
With the resistor for my Perrin uppipe, I just disconnected the wiring harness of the EGT and put the resistor in the female end of the connection. No CEL.
ditto... just unplug it, and plug it back with the resistor and you're set.
#5
Registered User
Thread Starter
Join Date: Nov 2002
Location: Milpitas, CA
Posts: 206
Car Info: Aspen White GDA
Where to get the resistor?
Damn! Those guys who installed the pipes lost the resistor. And they got me a new one but i just found that it's not 2.2kohm
So where can I get new one? Radio shack I suppose?
So where can I get new one? Radio shack I suppose?
Thread
Thread Starter
Forum
Replies
Last Post
t3ch9
Engine/Power - EJ20T (pre-2006 WRX and JDM)
11
04-10-2005 07:24 AM
esracer
Engine/Power - EJ20T (pre-2006 WRX and JDM)
4
03-16-2004 11:56 AM
WRXncrew
For Sale by Members
3
12-02-2003 07:07 AM
mrtrex
Vendor Group Buys/Specials
6
01-27-2003 04:44 PM