help w/install (joe p manual boost controller)
08-18-2005, 05:32 PM
#1
Registered User
Thread Starter
Join Date: Jun 2005
Location: glen allen va
Posts: 24
Car Info: 05 wrx aspen white
help w/install
im trying to install a joe p mbc on my 05 wrx. im lost. ive searched the site and ive been at it for over an hour. i think i have it installed right. i have the side going to the T on the wastegate. i have the one on the bottom going to the air intake. ive tried every adjustment from screwed all the way in to all the way out. im getting stuck at .05 mpa in 1st, 2nd, and 3rd. what am i doing wrong. the stock controller is still plugged up and the 2 lines are sitting there unplugged. does that matter? please help!!! im so frustrated at this point!!!
NEVER MIND. FIXED THE PROBLEM. WE'RE ALL SET NOW. THANKS
NEVER MIND. FIXED THE PROBLEM. WE'RE ALL SET NOW. THANKS
Last edited by 05wrxblowthis; 08-18-2005 at 08:21 PM.
Thread
Thread Starter
Forum
Replies
Last Post
wrx46
Engine/Power - EJ20T (pre-2006 WRX and JDM)
16
10-29-2003 01:07 PM
slvrwrx02
Engine/Power - EJ20T (pre-2006 WRX and JDM)
1
09-18-2003 04:59 PM
Hidden Dragon
Engine/Power - EJ20T (pre-2006 WRX and JDM)
5
04-07-2003 07:25 PM
