Engine/Power - EJ20T (pre-2006 WRX and JDM) There is replacement for displacement, it is forced induction - OEM 2.0 liter turbo engines in the USDM WRX. 90-94 Legacy Turbo EJ22 turbo engines can also be discussed here.

HELP!! Noise after turboback install

Thread Tools
 
Search this Thread
 
Old 12-03-2004, 05:58 PM
  #1  
Registered User
Thread Starter
iTrader: (8)
 
oct1285's Avatar
 
Join Date: Jun 2004
Location: Bay Area
Posts: 744
Car Info: iono nemore
HELP!! Noise after turboback install

someone please help me. After installed my turboback i get this bad grinding noise when i change gears. its most noticeable in 2nd. Wat it could it be?

I installed a fujitsubo legalis super r with a jdm spec helix dp. everything went fine, there are no leaks. But when i was jacking up the car to remove the jackstands i heard a loud pop. I looked and didnt see anything and didnt think much of it.

I'm thinking something snapped or somethings caught. or it might be the transmission?
oct1285 is offline  
Old 12-03-2004, 06:18 PM
  #2  
Registered User
iTrader: (2)
 
maku's Avatar
 
Join Date: Nov 2002
Posts: 176
Originally Posted by oct1285
someone please help me. After installed my turboback i get this bad grinding noise when i change gears. its most noticeable in 2nd. Wat it could it be?

I installed a fujitsubo legalis super r with a jdm spec helix dp. everything went fine, there are no leaks. But when i was jacking up the car to remove the jackstands i heard a loud pop. I looked and didnt see anything and didnt think much of it.

I'm thinking something snapped or somethings caught. or it might be the transmission?
check to see if the transmission is rubbing against the downpipe?
maku is offline  
Old 12-03-2004, 07:39 PM
  #3  
Registered User
Thread Starter
iTrader: (8)
 
oct1285's Avatar
 
Join Date: Jun 2004
Location: Bay Area
Posts: 744
Car Info: iono nemore
is it possible to drive it off? as stupid as that sounds.

i also adjusted the wastegate arm to fix the flutter. can the wastegate or turbo cuase the problems i've described?

Last edited by oct1285; 12-03-2004 at 07:43 PM.
oct1285 is offline  
Old 12-03-2004, 08:18 PM
  #4  
VIP Member
iTrader: (2)
 
mmboost's Avatar
 
Join Date: Nov 2002
Location: Longing for my ol' white '02 WRX :(
Posts: 3,639
Car Info: 2016 Acura RDX ... meh. Um, nice subwoofer?
omg. get under the car and fix it. maku is probably right. it could also berubbing against the drive shaft in the vicinity of what used to tbe the resonator. which TB is this?

jason
mmboost is offline  
Old 12-03-2004, 08:24 PM
  #5  
Registered User
Thread Starter
iTrader: (8)
 
oct1285's Avatar
 
Join Date: Jun 2004
Location: Bay Area
Posts: 744
Car Info: iono nemore
Originally Posted by mmboost
omg. get under the car and fix it. maku is probably right. it could also berubbing against the drive shaft in the vicinity of what used to tbe the resonator. which TB is this?

jason
u may be right about it rubbing. the noise is coming from the the middle of the car mostly on the drivers side. I can feel it thru the pedals. especially when changing from 1-2. could i have broken the trannie?

the tb is a fujitsubo legalis super R mated to a helix jdm-spec dp
oct1285 is offline  
Old 12-03-2004, 09:27 PM
  #6  
Registered User
 
Smooth_Ej20's Avatar
 
Join Date: Feb 2004
Location: Clearwater Florida
Posts: 218
Car Info: 2004 Wrx
where under the car did you jack it up? i cant imagine anything popping unless you jacked it up under the tranny or driveshaft. By the way, how do you like the exhaust? I have the same one but with a cusco DP. I also got the Fujitsubo Super Ex with up-pipe.
Smooth_Ej20 is offline  
Old 12-03-2004, 09:30 PM
  #7  
Registered User
Thread Starter
iTrader: (8)
 
oct1285's Avatar
 
Join Date: Jun 2004
Location: Bay Area
Posts: 744
Car Info: iono nemore
Originally Posted by Smooth_Ej20
where under the car did you jack it up? i cant imagine anything popping unless you jacked it up under the tranny or driveshaft. By the way, how do you like the exhaust? I have the same one but with a cusco DP. I also got the Fujitsubo Super Ex with up-pipe.
the jack plate. i didnt lift it on the trannie or the driveshaft. i kno better than that.
oct1285 is offline  
Old 12-05-2004, 09:21 PM
  #8  
Registered User
 
leftwo's Avatar
 
Join Date: Oct 2004
Location: Oakland
Posts: 339
Car Info: 05 STi
Does it grind every time, or only under hard acceleration?

If you jacked it up in the correct place then something would have to be
really messed up for it to break anything. Sometimes you can get rubbing
only when the suspension is loaded weight. If you can't find anything
when you jack it up, try putting it on ramps and looking for where it's rubbing.
leftwo is offline  
Old 12-05-2004, 09:25 PM
  #9  
Registered User
Thread Starter
iTrader: (8)
 
oct1285's Avatar
 
Join Date: Jun 2004
Location: Bay Area
Posts: 744
Car Info: iono nemore
found out it was rubbing the transmission xmember. my so called friend who helped me install it didnt put the dp bracket on right.
oct1285 is offline  
Old 12-05-2004, 09:34 PM
  #10  
Registered User
 
leftwo's Avatar
 
Join Date: Oct 2004
Location: Oakland
Posts: 339
Car Info: 05 STi
I guess that is better than having a bad transmission
leftwo is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
i<3dirt
Sacramento & Reno
5
10-20-2014 10:26 AM
tkarabian
Engine/Power - EJ20T (pre-2006 WRX and JDM)
3
02-13-2006 10:40 PM
cherrywrx
Engine/Power - EJ20T (pre-2006 WRX and JDM)
0
09-30-2003 02:39 PM
cobraKLR
Suspension, Handling, and Brakes
7
06-17-2003 01:31 PM
turbo_j
Engine/Power - EJ20T (pre-2006 WRX and JDM)
1
06-13-2003 11:26 PM



Quick Reply: HELP!! Noise after turboback install



All times are GMT -7. The time now is 07:17 AM.