Helix DP onto a Borla hush cat back -- fitment?
07-06-2004, 01:29 PM
#16
Registered User
Join Date: Feb 2004
Location: The Hunted Forest
Posts: 720
Car Info: Mazda Protege '02 (Wishing protege has AWD and a H6 twin turbo)
To make the down pipe fit to the borla what i did was picked up a 3" sleeve connector at a local parts store. Thats a 3" to 3" sleeve. Then i welded the larger end onto the mouth of the DP.
This allowed me to slide the borla hush onto the DP and just clamp it on from there
.
This allowed me to slide the borla hush onto the DP and just clamp it on from there
.
07-08-2004, 10:40 PM
#18
Guest
Posts: n/a
from what ive learned crawling throughout these forums and doing searches, and please correct me if im wrong... if you get a DP that doesn't replace the 3rd cat, then the Borla Hush should work fine. The Stromung 3" DP with divorced wastegate will not replace the 3rd cat. However the Helix DP replaces the 3rd cat, and has a different attachment, therefore not allowing it to mate up with the Borla Hush. This has been my understanding after talking to some vendors and other people on this site.
07-09-2004, 12:51 AM
#19
Originally Posted by allxusedxup
from what ive learned crawling throughout these forums and doing searches, and please correct me if im wrong... if you get a DP that doesn't replace the 3rd cat, then the Borla Hush should work fine. The Stromung 3" DP with divorced wastegate will not replace the 3rd cat. However the Helix DP replaces the 3rd cat, and has a different attachment, therefore not allowing it to mate up with the Borla Hush. This has been my understanding after talking to some vendors and other people on this site.
Mike
07-09-2004, 11:09 AM
#21
Guest
Posts: n/a
Originally Posted by aznfoos
i have that setup:
Stromung 3" DP with divorced wastegate + stock 3rd cat + hush cat-back
works great and not too loud, and good power.
Stromung 3" DP with divorced wastegate + stock 3rd cat + hush cat-back
works great and not too loud, and good power.
07-09-2004, 02:25 PM
#22
Registered User
Join Date: Feb 2004
Location: The Hunted Forest
Posts: 720
Car Info: Mazda Protege '02 (Wishing protege has AWD and a H6 twin turbo)
Originally Posted by allxusedxup
i am working on gettting all of these parts, as of now i have the helix up pipe, stromung dp and im debating whether or not to get the Borla Hush or another twin tip system. would your recommend your setup, or do you have any sound clips of your setup? Thanks alot
07-09-2004, 03:37 PM
#23
Guest
Posts: n/a
Originally Posted by allxusedxup
i am working on gettting all of these parts, as of now i have the helix up pipe, stromung dp and im debating whether or not to get the Borla Hush or another twin tip system. would your recommend your setup, or do you have any sound clips of your setup? Thanks alot
07-09-2004, 03:46 PM
#24
Registered User
Join Date: Feb 2004
Location: The Hunted Forest
Posts: 720
Car Info: Mazda Protege '02 (Wishing protege has AWD and a H6 twin turbo)
Originally Posted by aznfoos
i have no idea on how to record my exhaust, but i'm not too crazy about the loud droning sound of most exhausts out there. I like the low grumble and it gets loud only in WOT. Otherwise, i like it quiet for everyday driving.
You'd get a good idea which one you want to get then.
07-10-2004, 09:20 PM
#25
Guest
Posts: n/a
Originally Posted by RoadSpike
Since your have a helix dp you will be welding if you get a borla. You can have a buddy weld piece so it slips on or you can try to find a flange or somethin that would bolt onto the helix and clamp it onto the borla.
Thread
Thread Starter
Forum
Replies
Last Post
johndabrit
NorCal Classifieds
15
04-08-2010 09:13 AM
gilmore25
Used Aftermarket Car Parts For Sale
7
01-19-2006 02:47 PM
02wrxwag
NorCal Classifieds
2
01-31-2005 08:28 AM
1wrx2goplz
NorCal Classifieds
16
07-19-2004 01:09 PM
