code p1312 help
#5
VIP Member
iTrader: (9)
Join Date: Nov 2002
Location: ...a craphole in No.County San Diego
Posts: 3,928
Car Info: MMVI AW WRX STI
Heheh, I'll post them here then!!
If you have no other codes...your EGT sensor is bad.
Lemme guess...you have a catless uppipe? Read up on the EGT resistor fix , go to radio shack and buy the resistor, and plug it in. For the best fix, plug the hole with bolt (M12x1.25). If you car is stock, take it in.
-=Eric
If you have no other codes...your EGT sensor is bad.
Lemme guess...you have a catless uppipe? Read up on the EGT resistor fix , go to radio shack and buy the resistor, and plug it in. For the best fix, plug the hole with bolt (M12x1.25). If you car is stock, take it in.
-=Eric
#8
Registered User
Thread Starter
Join Date: Dec 2002
Location: Milpitas, CA
Posts: 555
Car Info: 2003 WRX Metallic Silver
Originally posted by RacerZ22
if your catless its not that bad just get the resistor and its an easy fix
if your catless its not that bad just get the resistor and its an easy fix
Thread
Thread Starter
Forum
Replies
Last Post
New2MeSuby
Engine/Power - EJ20T (pre-2006 WRX and JDM)
5
05-24-2004 08:40 AM