Engine/Power - EJ20T (pre-2006 WRX and JDM) There is replacement for displacement, it is forced induction - OEM 2.0 liter turbo engines in the USDM WRX. 90-94 Legacy Turbo EJ22 turbo engines can also be discussed here.

CEL trouble code P0122 (was: need help)

Thread Tools
 
Search this Thread
 
Old 04-03-2007 | 12:39 AM
  #1  
kevin_ej20's Avatar
Thread Starter
Registered User
 
Joined: Feb 2006
Posts: 41
From: sac town
Car Info: 02 wrx
Exclamation CEL trouble code P0122 (was: need help)

my check light came on p0122 its something to do with the maf. have any ideas thanks
Old 04-03-2007 | 08:22 PM
  #2  
MO REX's Avatar
VIP Member
iTrader: (2)
 
Joined: Dec 2003
Posts: 1,245
From: St. Louis MO
Car Info: 02 PSM WRX
P0122 is a code for Throttle Position Sensor Circuit low input. If you want to troubleshoot this you will need a multimeter. Do you have one? Is your car idling rough, stalling or driving funny?
Old 04-04-2007 | 03:01 PM
  #3  
kevin_ej20's Avatar
Thread Starter
Registered User
 
Joined: Feb 2006
Posts: 41
From: sac town
Car Info: 02 wrx
yea when i let go of the gas the rpm drops below 500 rpm and jumps back up the normal
Old 04-04-2007 | 03:03 PM
  #4  
kevin_ej20's Avatar
Thread Starter
Registered User
 
Joined: Feb 2006
Posts: 41
From: sac town
Car Info: 02 wrx
i cleaned the MAF but still the same
Old 04-04-2007 | 04:59 PM
  #5  
MO REX's Avatar
VIP Member
iTrader: (2)
 
Joined: Dec 2003
Posts: 1,245
From: St. Louis MO
Car Info: 02 PSM WRX
The MAF isn't the problem if the code is P0122. P0122 is a code for Throttle Position Sensor Circuit low input and AFAIK the best way to troubleshoot this problem is with a multimeter. Do you have one?
Old 04-08-2007 | 01:48 PM
  #6  
kevin_ej20's Avatar
Thread Starter
Registered User
 
Joined: Feb 2006
Posts: 41
From: sac town
Car Info: 02 wrx
i replaced the Throttle Position Sensor but still actin funny
Old 04-08-2007 | 05:40 PM
  #7  
MO REX's Avatar
VIP Member
iTrader: (2)
 
Joined: Dec 2003
Posts: 1,245
From: St. Louis MO
Car Info: 02 PSM WRX
You can't just go replacing parts without troubleshooting first. That's why I've asked you if you have a multimeter two times.

It could be something simple and the only way to figure it out is by taking readings with a multimeter.
Old 04-08-2007 | 07:03 PM
  #8  
kevin_ej20's Avatar
Thread Starter
Registered User
 
Joined: Feb 2006
Posts: 41
From: sac town
Car Info: 02 wrx
yea i have one
Old 04-08-2007 | 09:27 PM
  #9  
MO REX's Avatar
VIP Member
iTrader: (2)
 
Joined: Dec 2003
Posts: 1,245
From: St. Louis MO
Car Info: 02 PSM WRX
I've been very busy the last week but I'll try to post the way to troubleshoot this problem tomorrow. I have the manual on my hard drive but I'm not exactly sure what I need to do to make a non PDF file that I can post. I know I can print a copy and scan it but I'm out of black ink right now.

I'll do my best to get it to you ASAP.
Old 04-11-2007 | 07:34 PM
  #10  
MO REX's Avatar
VIP Member
iTrader: (2)
 
Joined: Dec 2003
Posts: 1,245
From: St. Louis MO
Car Info: 02 PSM WRX
Sorry it took so long.

Good luck
Attached Thumbnails CEL trouble code P0122 (was: need help)-tps1.jpg   CEL trouble code P0122 (was: need help)-tps2.jpg   CEL trouble code P0122 (was: need help)-tps3.jpg  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
mistaanime
Sacramento & Reno
12
01-23-2014 10:23 AM
brucelee
Bay Area
4
08-16-2009 03:41 PM
subaruferrucci
Engine Management
1
04-11-2006 01:51 PM
tommysyko
Bay Area
0
03-16-2006 02:47 AM
Wrxplaya11
Suby Shopping & Maintenance/Warranty
5
03-13-2006 12:39 PM




All times are GMT -7. The time now is 01:25 AM.