Back to stock 04 still wont rev past 5g
#16
Originally Posted by SilverRex04
What should i expect if i go catless without the Utec, I'm sure the computer is not going to like it right. Alot of codes I would think?
Cel, no performance issues. If the cel bothers you put a 2.2kohm resistor(i believe) in the plug for the egt probe, tape it or heatshrink it to keep it dry. I have AP so no need for resistor. I just put some dielectric grease in the plug and heatshrunk it. I also plugged the egt bung in my helix flex. I found my uppie on ebay new for $100 with new gaskets.
Scoobymods.com has great uppie installation intructions. use the ones for the Perrin uppipe.
#17
Registered User
Thread Starter
Join Date: Sep 2004
Location: Long Island
Posts: 65
Car Info: 04 Sti swap, VF22 18psi, 255l fule pump,ecutek 93 oct, Full exhaust TXS, Sti ra gears, much more...
thanks alot for the help im going to gut the cat. today at some point and see what happens.
#18
Guest
Posts: n/a
i heard alot of bad things about gutting out the precat... wouldnt reccomend it, catless upppies arent too much id consider one of those first, and the 2.2k resistor is easy as hell to do, also, if u havent already bought ur utec, consider the accessport, i use that, i love it.
#19
Registered User
Thread Starter
Join Date: Sep 2004
Location: Long Island
Posts: 65
Car Info: 04 Sti swap, VF22 18psi, 255l fule pump,ecutek 93 oct, Full exhaust TXS, Sti ra gears, much more...
yea ure right i really need that utec gotta start saving for the parts again.
Thread
Thread Starter
Forum
Replies
Last Post
BlueBullet
Drivetrain
2
08-07-2010 09:16 AM
tayna1
Engine/Power - non turbo (All non turbo Imprezas)
1
01-01-2007 12:36 AM
SilverRex04
Engine/Power - EJ20T (pre-2006 WRX and JDM)
29
12-13-2004 10:40 PM
carletto
Engine/Power - EJ20T (pre-2006 WRX and JDM)
16
12-05-2004 10:07 AM