APS 725 or Perrin FMIC?
10-14-2006, 11:49 PM
#1
Registered User
Thread Starter
Join Date: Mar 2006
Location: whittier
Posts: 57
Car Info: 02wrx apex boost up down pipe ect
APS 725 or Perrin FMIC?
i have an aps sr 30 set up.... what i wanna know is if both intercoolers had the same price which one will be better??? im soon to buy either one
10-15-2006, 09:10 AM
#2
the artist formerly known as mcdrama
iTrader: (23)
Join Date: Apr 2004
Location: Santa Cruz Mountains, CA.
Posts: 6,428
Car Info: WRBP 2015 WRX Premium/CVT
well, you need to look at fitment, piping design(how smooth are the bends), and flow rate through the IC and if there is any pressure loss(doubtful on aftermart IC's since they are welded)
APS and Perrin both make excellen products, I would take a look at the reviews section here:
https://www.i-club.com/reviews/
As well as parts review on nasioc to help make your decision.
APS and Perrin both make excellen products, I would take a look at the reviews section here:
https://www.i-club.com/reviews/
As well as parts review on nasioc to help make your decision.
10-15-2006, 09:44 AM
#4
the artist formerly known as mcdrama
iTrader: (23)
Join Date: Apr 2004
Location: Santa Cruz Mountains, CA.
Posts: 6,428
Car Info: WRBP 2015 WRX Premium/CVT
Originally Posted by sigma pi
the review section will help
but any fmic is going to give you some pressure loss
but any fmic is going to give you some pressure loss
10-15-2006, 10:08 PM
#6
Registered User
iTrader: (1)
Join Date: Jul 2006
Location: Mount Vernon, Washington
Posts: 2,106
Car Info: 2002 WRX
your profile says '02 wrx soooo.
the aps 725 is too big.
the sr30 is good for about 340 hp
aps725 is for the 500-725 hp range( suited for 50-75 lb/min turbos)
i think it would be a better choice to go with the aps 525 with a range of 350-525 hp.(suited for 40-55 lb/min turbos)
I just looked at the Perrin FMIC. It's too big also.
the aps 725 is too big.
the sr30 is good for about 340 hp
aps725 is for the 500-725 hp range( suited for 50-75 lb/min turbos)
i think it would be a better choice to go with the aps 525 with a range of 350-525 hp.(suited for 40-55 lb/min turbos)
I just looked at the Perrin FMIC. It's too big also.
Last edited by Jakes02; 10-16-2006 at 12:09 AM.
10-16-2006, 08:22 AM
#8
Originally Posted by mcdrama
does the pressure loss happen cause of the additional volume to fill? I guess that makes sense. :P I'm still waking up.. need coffee.
no big deal
i think it has to do with the core
it think its like blowing hard through a coffie straw stir thing
big pressusre in your mouth not much on the other side
10-16-2006, 09:20 AM
#9
Registered User
iTrader: (1)
Join Date: Jul 2006
Location: Mount Vernon, Washington
Posts: 2,106
Car Info: 2002 WRX
Originally Posted by sigma pi
haha i know exactly how that is
no big deal
i think it has to do with the core
it think its like blowing hard through a coffie straw stir thing
big pressusre in your mouth not much on the other side
no big deal
i think it has to do with the core
it think its like blowing hard through a coffie straw stir thing
big pressusre in your mouth not much on the other side
isn't pressure drop the opposite? like blowing through a toilet paper tube, it doesn't get high velocity thus reducing the cooling effect?
10-16-2006, 09:42 AM
#11
Registered User
iTrader: (1)
Join Date: Jul 2006
Location: Mount Vernon, Washington
Posts: 2,106
Car Info: 2002 WRX
Originally Posted by sigma pi
either way you have round things going in your mouth
i dont see how the pressure drops from high to low pressure with the toilet paper roll
i dont see how the pressure drops from high to low pressure with the toilet paper roll
they taste funnyI thought the pressure dropped as it travelled through the I/C piping and that's why everyone tries to keep the piping length to a minimum.
10-16-2006, 12:48 PM
#13
Registered User
Thread Starter
Join Date: Mar 2006
Location: whittier
Posts: 57
Car Info: 02wrx apex boost up down pipe ect
i just called the perrin tuning shop and they said it would be good that no fmic is ever to big...they said go for it.....i really dont know what to do
