Blitz SBC Spec-S Boost Controller
#2
Registered User
iTrader: (1)
Join Date: Nov 2002
Location: G35 Coupe (FOR SALE)
Posts: 1,134
Car Info: G35 Coupe (FOR SALE)
Blitz contact info
Blitz North America, Inc.
4879 East La Palma Avenue Suite 201-202
Anaheim CA 92807, U.S.A
(714) 777-9766 Phone
(714) 777-9763 Fax
Business Hours
Monday - Friday
9:00a.m. - 6:00p.m. PST
Email Us: Info@blitz-na.com
4879 East La Palma Avenue Suite 201-202
Anaheim CA 92807, U.S.A
(714) 777-9766 Phone
(714) 777-9763 Fax
Business Hours
Monday - Friday
9:00a.m. - 6:00p.m. PST
Email Us: Info@blitz-na.com
#4
Guest
Posts: n/a
Originally posted by palaban
If that doesn't work, PM me and I'll walk you through it. I have the Spec R.
If that doesn't work, PM me and I'll walk you through it. I have the Spec R.
#5
Registered User
iTrader: (1)
Join Date: Nov 2002
Location: G35 Coupe (FOR SALE)
Posts: 1,134
Car Info: G35 Coupe (FOR SALE)
Quickie How-To
To set the Gain (boost acceleration/momentum): Press and hold the Mode button down until you see 12345 flashing in the upper lefthand corner. Turn the volume to set boost. Keep this setting below 15.
To set the Boost ratio: turn the Mode button to channel 1. Press and hold the Mode button until the 1 blinks. Turn the Volume **** to set the ratio. Keeping this setting between 40 and 55 should keep you between 14-16 psi. After you've set the ratio, press the mode button so the 1 stops blinking. Turn the Mode **** to 2 and repeat.
Let me know if you need additional help.
I strongly suggest using a boost gauge to monitor.
To set the Boost ratio: turn the Mode button to channel 1. Press and hold the Mode button until the 1 blinks. Turn the Volume **** to set the ratio. Keeping this setting between 40 and 55 should keep you between 14-16 psi. After you've set the ratio, press the mode button so the 1 stops blinking. Turn the Mode **** to 2 and repeat.
Let me know if you need additional help.
I strongly suggest using a boost gauge to monitor.
#6
Guest
Posts: n/a
Re: Quickie How-To
Originally posted by palaban
To set the Gain (boost acceleration/momentum): Press and hold the Mode button down until you see 12345 flashing in the upper lefthand corner. Turn the volume to set boost. Keep this setting below 15.
To set the Boost ratio: turn the Mode button to channel 1. Press and hold the Mode button until the 1 blinks. Turn the Volume **** to set the ratio. Keeping this setting between 40 and 55 should keep you between 14-16 psi. After you've set the ratio, press the mode button so the 1 stops blinking. Turn the Mode **** to 2 and repeat.
Let me know if you need additional help.
I strongly suggest using a boost gauge to monitor.
To set the Gain (boost acceleration/momentum): Press and hold the Mode button down until you see 12345 flashing in the upper lefthand corner. Turn the volume to set boost. Keep this setting below 15.
To set the Boost ratio: turn the Mode button to channel 1. Press and hold the Mode button until the 1 blinks. Turn the Volume **** to set the ratio. Keeping this setting between 40 and 55 should keep you between 14-16 psi. After you've set the ratio, press the mode button so the 1 stops blinking. Turn the Mode **** to 2 and repeat.
Let me know if you need additional help.
I strongly suggest using a boost gauge to monitor.
Thread
Thread Starter
Forum
Replies
Last Post
808_REX
New Aftermarket Car Parts For Sale
3
04-08-2006 04:41 AM