SBR Daily Special Thread !!!
#31
Reduce rotating mass!
Perrin's lightened crank pulley for the Subaru WRX, STi, and Legacy GT is engineered to reduce rotating mass, increasing horsepower and torque. Made from 6061T6 aluminum and weighing 1.2lbs, Perrin crank pulley is more then 4 lbs lighter than the stock crank pulley. Perrin's pulley is not underdriven and will not affect the life of your engine. The pulley is a redesigned, lighter rendering of the stock crank pulley.
$140 Shipped!
Oliver
om@slowboyracing.com
Perrin's lightened crank pulley for the Subaru WRX, STi, and Legacy GT is engineered to reduce rotating mass, increasing horsepower and torque. Made from 6061T6 aluminum and weighing 1.2lbs, Perrin crank pulley is more then 4 lbs lighter than the stock crank pulley. Perrin's pulley is not underdriven and will not affect the life of your engine. The pulley is a redesigned, lighter rendering of the stock crank pulley.
$140 Shipped!
Oliver
om@slowboyracing.com
#33
Pistons, rods and cams, oh my!
Pistons[/U][/B]
Cams
Rods
Oil Pumps
For the best service around send me a PM :banana:
Oliver
om@slowboyracing.com
Pistons[/U][/B]
Cams
Rods
Oil Pumps
For the best service around send me a PM :banana:
Oliver
om@slowboyracing.com
#35
I have APS 65mm and 70mm CAI's in stock!
This APS cold air intake system is certainly the most cost effective way to achieve greater air flow, great looks and fantastic sound for your sedan or wagon.
65mm $279 shipped
70mm $299 shipped
You stay classy I-Club
Oliver
om@slowboyracing.com
This APS cold air intake system is certainly the most cost effective way to achieve greater air flow, great looks and fantastic sound for your sedan or wagon.
65mm $279 shipped
70mm $299 shipped
You stay classy I-Club
Oliver
om@slowboyracing.com
#37
FIC injectors get FREE shipping this week! (until aug 15th)
Includes pig tails to adapt injectors to wiring harness!
Oliver
om@slowboyracing.com
Includes pig tails to adapt injectors to wiring harness!
Oliver
om@slowboyracing.com
#38
FREE shipping on all APS inlet pipes in stock!
At last a true high performance turbocharger inlet pipe that actually is a pipe! Due to the tight and complex space available under the stock inlet manifold, these pipes have traditionally been available only as an aftermarket silicon hose.
The APS Turbocharger Inlet Pipe however is precision manufactured in stainless steel and the thin wall tubing (when compared to silicon hoses) delivers the maximum possible internal sectional area for the highest turbocharger air flow. In addition, the strong pipe walls completely solves the problems of hose collapse when under suction at high air flow rates.
Thanks
Oliver
om@slowboyracing.com
At last a true high performance turbocharger inlet pipe that actually is a pipe! Due to the tight and complex space available under the stock inlet manifold, these pipes have traditionally been available only as an aftermarket silicon hose.
The APS Turbocharger Inlet Pipe however is precision manufactured in stainless steel and the thin wall tubing (when compared to silicon hoses) delivers the maximum possible internal sectional area for the highest turbocharger air flow. In addition, the strong pipe walls completely solves the problems of hose collapse when under suction at high air flow rates.
Thanks
Oliver
om@slowboyracing.com
#39
9 to 5 mod
iTrader: (6)
FIC injectors get FREE shipping this week! (until aug 15th)
Includes pig tails to adapt injectors to wiring harness!
Oliver
om@slowboyracing.com
Includes pig tails to adapt injectors to wiring harness!
Oliver
om@slowboyracing.com
we sell them at work
#40
Cusco 3-Piece Engine and Transmission Mount Set for WRX/STi
This is a complete, bolt-on hardened mount set for the 2002-5 WRX and 04-05 STi (Does not fit 06+ models). Designed to stiffen up your drivetrain, remove flex, and make for firmer, more controlled launches; the Cusco 3-piece mount set is the solution to worn-out motor mounts due to increased power. Includes both engine mounts and a transmission mount
Oliver
om@slowboyracing.com
This is a complete, bolt-on hardened mount set for the 2002-5 WRX and 04-05 STi (Does not fit 06+ models). Designed to stiffen up your drivetrain, remove flex, and make for firmer, more controlled launches; the Cusco 3-piece mount set is the solution to worn-out motor mounts due to increased power. Includes both engine mounts and a transmission mount
Oliver
om@slowboyracing.com
#41
APS in stock sale (Just a preview of what I have in stock)
Side feed fuel rails -2 in stock
Tumbler Delete Valves -several in stock PM for your application
Up-Pipe -2 in stock (Direct fit)
FREE Shipping on all in stock APS!
Oliver
om@slowboyracing.com
#42
Mahle/Manley piston and rod combos ready to ship!
Manley I-Beams $735 Shipped -3 sets in stock
Manley H-Beams $345 shipped -2 sets in stock
Mahle 99.5mm pistons $445 Shipped -1 set in stock
Mahle 93mm pistons $445 Shipped -2 sets in stock
Mix and match any combo for an additional $10 off our already low pricing.
Oliver
om@slowboyracing.com
Manley I-Beams $735 Shipped -3 sets in stock
Manley H-Beams $345 shipped -2 sets in stock
Mahle 99.5mm pistons $445 Shipped -1 set in stock
Mahle 93mm pistons $445 Shipped -2 sets in stock
Mix and match any combo for an additional $10 off our already low pricing.
Oliver
om@slowboyracing.com
#43
I have ONE TurboXS FMIC kit left in stock
Today (Saturday) until Monday (8/18/08) Its going for $875 SHIPPED!
Oliver
om@slowboyracing.com
#44
Turbo XS external gate up pipes! $255 shipped
Don't forget your 44mm Tial Wastegate
PM me today!
Oliver
om@slowboyracing.com
#45
Keep your intake charge cooler than the other side of the pillow with the APS DR525 FMIC!
PM me for all your performance needs
Oliver
om@slowboyracing.com
PM me for all your performance needs
Oliver
om@slowboyracing.com