I wanna claim fastest stock major parts no nos...
#48
Guest
Posts: n/a
Hassassin is lying he has Nawz!!!!!!!!!!!
Just f*cking around Hasan came back alittle while ago and seen u arguing with people about this, i think it goes like this
not all car are created equal.... My friend has a A3 GTi which is the body that is made btwn 93-98 or so...not the new ones... now mostly everyone with those cars go 14.8 with an intake, exhaust and chip.... my friend bought abrand new 98...he put the same stuff Intake, exhaust and chip and was going 14.3....
hassassin just has one of the factory freaks....
just like my old integra... all the car had was a cheasy $55 intake and a cheasy azz pressbent exhaust and it went 15.4... LS model no VTEC and yet brand new integras VTEC model are going 15.2-15-4 with same mods.... intake and exhaust...
Now all must bow to hassassin.......
Just f*cking around Hasan came back alittle while ago and seen u arguing with people about this, i think it goes like this
not all car are created equal.... My friend has a A3 GTi which is the body that is made btwn 93-98 or so...not the new ones... now mostly everyone with those cars go 14.8 with an intake, exhaust and chip.... my friend bought abrand new 98...he put the same stuff Intake, exhaust and chip and was going 14.3....
hassassin just has one of the factory freaks....
just like my old integra... all the car had was a cheasy $55 intake and a cheasy azz pressbent exhaust and it went 15.4... LS model no VTEC and yet brand new integras VTEC model are going 15.2-15-4 with same mods.... intake and exhaust...
Now all must bow to hassassin.......
#50
Guest
Posts: n/a
I'm going to the track on the 23rd if the weather is good and the track is open(sometimes they close for cold weather).. I'm shooting for an 13.0-13.1 with these mods;
Samco IC hoses
Samco Radiator hoses(just for bling factor)
GFB pulleys
GFB MBC
JUN flywheel
STI organic/kevlar clutch w/STI 850kg pressure plate
Grp. N engine/tranny mounts
STI hoodscoop
Catless 2.5inch turboback
Perrin upipe
K&N panel filter
I'm going to ATCO so if you want Hassasin you can come out with me and try for 12s with your car! I doubt I'm goint to get an 13.0, I have an feeling I'm going to end up running 13.2-13.3 which would still be better than my best time of 13.4. Let me know if you want to meet up with me out there Hassasin, it would be cool to line up next to you at the track since it would be an close race(sorta).
Paul
Samco IC hoses
Samco Radiator hoses(just for bling factor)
GFB pulleys
GFB MBC
JUN flywheel
STI organic/kevlar clutch w/STI 850kg pressure plate
Grp. N engine/tranny mounts
STI hoodscoop
Catless 2.5inch turboback
Perrin upipe
K&N panel filter
I'm going to ATCO so if you want Hassasin you can come out with me and try for 12s with your car! I doubt I'm goint to get an 13.0, I have an feeling I'm going to end up running 13.2-13.3 which would still be better than my best time of 13.4. Let me know if you want to meet up with me out there Hassasin, it would be cool to line up next to you at the track since it would be an close race(sorta).
Paul
Last edited by PaulRex; 02-13-2003 at 12:54 PM.
#51
Guest
Posts: n/a
Originally posted by PaulRex
I'm going to the track on the 23rd if the weather is good and the track is open(sometimes they close for cold weather).. I'm shooting for an 13.0-13.1 with these mods;
Samco IC hoses
Samco Radiator hoses(just for bling factor)
GFB pulleys
GFB MBC
JUN flywheel
STI organic/kevlar clutch w/STI 850kg pressure plate
Grp. N engine/tranny mounts
STI hoodscoop
Catless 2.5inch turboback
Perrin upipe
K&N panel filter
I'm going to ATCO so if you want Hassasin you can come out with me and try for 12s with your car! I doubt I'm goint to get an 13.0, I have an feeling I'm going to end up running 13.2-13.3 which would still be better than my best time of 13.4. Let me know if you want to meet up with me out there Hassasin, it would be cool to line up next to you at the track since it would be an close race(sorta).
Paul
I'm going to the track on the 23rd if the weather is good and the track is open(sometimes they close for cold weather).. I'm shooting for an 13.0-13.1 with these mods;
Samco IC hoses
Samco Radiator hoses(just for bling factor)
GFB pulleys
GFB MBC
JUN flywheel
STI organic/kevlar clutch w/STI 850kg pressure plate
Grp. N engine/tranny mounts
STI hoodscoop
Catless 2.5inch turboback
Perrin upipe
K&N panel filter
I'm going to ATCO so if you want Hassasin you can come out with me and try for 12s with your car! I doubt I'm goint to get an 13.0, I have an feeling I'm going to end up running 13.2-13.3 which would still be better than my best time of 13.4. Let me know if you want to meet up with me out there Hassasin, it would be cool to line up next to you at the track since it would be an close race(sorta).
Paul
#52
Guest
Posts: n/a
My best 60' so far is an 1.848, however that is with the stock clutch/flywheel and different mods(well less mods), it's kinda up in the air what 60' I would get, but i suspect I can get another 1.8 60'.
Interestingly my best time of 13.44@98 was with only an MBC, K&N filter, and turbo-xs-rfl BOV(which i have gotten rid of since then), and the SOA dealer option STI muffler(which I also have sold).
Interestingly my best time of 13.44@98 was with only an MBC, K&N filter, and turbo-xs-rfl BOV(which i have gotten rid of since then), and the SOA dealer option STI muffler(which I also have sold).
Last edited by PaulRex; 02-13-2003 at 01:58 PM.
#53
Guest
Posts: n/a
Originally posted by PaulRex
My best 60' so far is an 1.848, however that is with the stock clutch/flywheel and different mods(well less mods), it's kinda up in the air what 60' I would get, but i suspect I can get another 1.8 60'.
Interestingly my best time of 13.4@98 was with only an MBC, K&N filter, and turbo-xs-rfl BOV(which i have gotten rid of since then), and the SOA dealer option STI muffler(which I also have sold).
My best 60' so far is an 1.848, however that is with the stock clutch/flywheel and different mods(well less mods), it's kinda up in the air what 60' I would get, but i suspect I can get another 1.8 60'.
Interestingly my best time of 13.4@98 was with only an MBC, K&N filter, and turbo-xs-rfl BOV(which i have gotten rid of since then), and the SOA dealer option STI muffler(which I also have sold).
13.4 w/those mods is nice!
#54
Registered User
Join Date: Jul 2003
Location: Grand Rapids, MI
Posts: 49
Car Info: 2002 WRX and 2001 Mercury Cougar
I know this is kinda an old post but I used the Search and this kinda answered my question but with old data I wanted to know new times.
What is the Fastest WRX with the Stock Turbo?
Anyone know of a place that has a record board?
What is the Fastest WRX with the Stock Turbo?
Anyone know of a place that has a record board?
#55
Registered User
iTrader: (17)
Join Date: Apr 2003
Location: Downtown oakland
Posts: 6,249
Car Info: civic
Originally Posted by jreat
I know this is kinda an old post but I used the Search and this kinda answered my question but with old data I wanted to know new times.
What is the Fastest WRX with the Stock Turbo?
Anyone know of a place that has a record board?
What is the Fastest WRX with the Stock Turbo?
Anyone know of a place that has a record board?
i think someone posted over on nasioc saying something like a 12.9 or something.
Thread
Thread Starter
Forum
Replies
Last Post