98 impreza L with EJ20 , Link ECU
#1
Guest
Posts: n/a
98 impreza L with EJ20 , Link ECU
Hello guys, I'm planning to sell my project car.. don't really have time to drive it .
here's the detail:
1998 impreza L 4 door RED 5 speed 38000 miles with power windows, power door locks, A/C
full 99 RS body kit
98 RS gold rims
Stock WRX brake system, front installed, rear not yet
Jdm Apexi cup kit suspension, not coil over
20 MM rear sway bar
whiteline end link, not install yet
Fake STI seat , not install yet
carbon fiber hood, not install yet
LINK stand alone wire in ECU with the cable that connect to the computer
96 WRX EJ20 turbo motor with oil cooler and top mount intercooler
custom 8puck clutch, double presure plate, light weighted fly wheel
HkS gauges, boost, EGT, oil temp not install yet
upgrade 255 fuel pump
upgrade 550cc injector
Greddy manual boost control
H4 HID system, not install yet
the car is up and running right now, I set the boost at 1 bar, tried race my friend's WRX.. is a little faster that his.. maybe like half a car lenght.. not too much. But is running on base map only, no tuning yet.
I hope to find a good home for it... is in pretty good condition.. at least every body saw it said I shouldn't sell it..
ppl said it should worth about $6000.. but I'm open for reasonable offer, will post some picture later on.
Please keep in mind this is a project car.. so some of the minor stuff still have to be done.. like the tech is not hooked up yet.. and some wire needs to be clean up.. but is driveable.. I drove it to work every day..
e-mail me at alex@aspecproducts.com if u guys have any qestion
I'm located in SO-CAL
Have fun.
Thanks
here's the detail:
1998 impreza L 4 door RED 5 speed 38000 miles with power windows, power door locks, A/C
full 99 RS body kit
98 RS gold rims
Stock WRX brake system, front installed, rear not yet
Jdm Apexi cup kit suspension, not coil over
20 MM rear sway bar
whiteline end link, not install yet
Fake STI seat , not install yet
carbon fiber hood, not install yet
LINK stand alone wire in ECU with the cable that connect to the computer
96 WRX EJ20 turbo motor with oil cooler and top mount intercooler
custom 8puck clutch, double presure plate, light weighted fly wheel
HkS gauges, boost, EGT, oil temp not install yet
upgrade 255 fuel pump
upgrade 550cc injector
Greddy manual boost control
H4 HID system, not install yet
the car is up and running right now, I set the boost at 1 bar, tried race my friend's WRX.. is a little faster that his.. maybe like half a car lenght.. not too much. But is running on base map only, no tuning yet.
I hope to find a good home for it... is in pretty good condition.. at least every body saw it said I shouldn't sell it..
ppl said it should worth about $6000.. but I'm open for reasonable offer, will post some picture later on.
Please keep in mind this is a project car.. so some of the minor stuff still have to be done.. like the tech is not hooked up yet.. and some wire needs to be clean up.. but is driveable.. I drove it to work every day..
e-mail me at alex@aspecproducts.com if u guys have any qestion
I'm located in SO-CAL
Have fun.
Thanks
#2
Guest
Posts: n/a
picture
guys here's some picture
http://us.f2.yahoofs.com/users/411f3...GjpJBBIMjfVRpz
http://us.f2.yahoofs.com/users/411f3...espJBB34AQZfXL
http://us.f2.yahoofs.com/users/411f3...espJBB9Ltghxon
http://us.f2.yahoofs.com/users/411f3...espJBB2rxYhkHO
http://us.f2.yahoofs.com/users/411f3...espJBB6Ok1_G9f
http://us.f2.yahoofs.com/users/411f3...espJBB3z14evkz
http://us.f2.yahoofs.com/users/411f3...GjpJBBIMjfVRpz
http://us.f2.yahoofs.com/users/411f3...espJBB34AQZfXL
http://us.f2.yahoofs.com/users/411f3...espJBB9Ltghxon
http://us.f2.yahoofs.com/users/411f3...espJBB2rxYhkHO
http://us.f2.yahoofs.com/users/411f3...espJBB6Ok1_G9f
http://us.f2.yahoofs.com/users/411f3...espJBB3z14evkz
#3
I posted on another board too, but saw the pics on here...pic links didn't work though. Emailing you now. Thanks
-Joe
edit: highly highly intersted...please respond to email so my friend out in so-cal can check it out for me. Thanks!
-Joe
edit: highly highly intersted...please respond to email so my friend out in so-cal can check it out for me. Thanks!
Last edited by stentorian; 08-21-2004 at 03:10 PM.
#7
Registered User
iTrader: (4)
Join Date: Dec 2003
Location: hangtown
Posts: 4,618
Car Info: '02 WRagon
hhmmmpf...
maybe if this guy comes thru and picks up my integra this or next weekend i'll have to get in touch with you...
will it pass smog okay?
email me some pics pls or a link to your yahoo album
dbl_a11@yahoo.com
________
MEDICAL MARIJUAN DISPENSERIES
maybe if this guy comes thru and picks up my integra this or next weekend i'll have to get in touch with you...
will it pass smog okay?
email me some pics pls or a link to your yahoo album
dbl_a11@yahoo.com
________
MEDICAL MARIJUAN DISPENSERIES
Last edited by pozzi; 04-09-2011 at 05:32 AM.
#9
Registered User
iTrader: (4)
Join Date: Dec 2003
Location: hangtown
Posts: 4,618
Car Info: '02 WRagon
hey....whatever...as long as DMV gets a smog cert for the sale to go thru...
...........eeerrrrrrrrrrrrrr............i didn't say, hear, do nuffin'...*wink*
i emailed you for a link to your yahoo album...
reply or post here...
peas.
~AR
________
Deposit insurance forums
...........eeerrrrrrrrrrrrrr............i didn't say, hear, do nuffin'...*wink*
i emailed you for a link to your yahoo album...
reply or post here...
peas.
~AR
________
Deposit insurance forums
Last edited by pozzi; 04-09-2011 at 05:32 AM.
#13
Alex,
Were you able to do any more work on the wiring? If so did you get the Link wired in when doing so? If so does everything that wasn't hooked up now working? Let me know, still interested, just would liek to see the wiring more complete than what it is/was at. Thanks
-Joe
Were you able to do any more work on the wiring? If so did you get the Link wired in when doing so? If so does everything that wasn't hooked up now working? Let me know, still interested, just would liek to see the wiring more complete than what it is/was at. Thanks
-Joe