DesertMetallicA

I just bought a Greddy Boost gauge, and its the JDM style so i have to do some calculations to get the "american psi." So was wondering if anyone knew what it was. I heard 1.0kg = around 14.5psi..

Nick Koan

iTrader: (3)

Yeah, something like that.

Wingless Wonder

iTrader: (7)

If the gauge states the measurement in kg/square centimeter (cm), then here is a java-enabled conversion page that gives the boost pressure as 14.22334 lbs/sq. inch. See the 'Pressure/Stress' section of the conversion page.

If you haven't installed the gauge yet, consider getting a different gauge with standard boost pressure that you can read at a glance. I have the factory gauge pack that measures boost in MPa (megaPascals) or something like that and doing mental conversions while driving at less than full boost gets old.

--
0==WW==0
"…axles of evil…" - george w. bush

SubyN00by

iTrader: (15)

remember, bar = .98kg/cm2 or about 1:1

0.1 bar = 1.4504 PSI
0.2 bar = 2.9008 PSI
0.3 bar = 4.3511 PSI
0.4 bar = 5.8015 PSI
0.5 bar = 7.2519 PSI
0.6 bar = 8.7023 PSI
0.7 bar = 10.1526 PSI
0.8 bar = 11.6030 PSI
0.9 bar = 13.0534 PSI
1.0 bar = 14.5038 PSI
1.1 bar = 15.9542 PSI
1.2 bar = 17.4045 PSI
1.3 bar = 18.8549 PSI
1.4 bar = 20.3053 PSI
1.5 bar = 21.7557 PSI
1.6 bar = 23.2060 PSI
1.7 bar = 24.6564 PSI
1.8 bar = 26.1068 PSI
1.9 bar = 27.5572 PSI
2.0 bar = 29.0075 PSI
2.1 bar = 30.4579 PSI
2.2 bar = 31.9083 PSI
2.3 bar = 33.3587 PSI
2.4 bar = 34.8091 PSI
2.5 bar = 36.2594 PSI
2.6 bar = 37.7098 PSI
2.7 bar = 39.1602 PSI
2.8 bar = 40.6106 PSI
2.9 bar = 42.0609 PSI
3.0 bar = 43.5113 PSI