Toyotas (I know wrong place for this)
#1
Registered User
Thread Starter
iTrader: (23)
Join Date: Feb 2009
Location: South SF
Posts: 2,674
Car Info: 97' Dodge Cummins and an RSTI thingie
Toyotas (I know wrong place for this)
I'm getting a 4 runner and it needs to have the 22re rebuilt, anyone know any good shops that are good with toyotas?
#2
Registered User
iTrader: (7)
Join Date: Jul 2007
Location: San Fran-Mateo
Posts: 894
Car Info: 2012 G37S / Sold 06 WRX
Toy Shop in SF.
(They have 2 locations)
4818 Geary Blvd
(between 12th Ave & Funston Ave)
San Francisco, CA 94118
and
1675 Pacific Ave
(between Polk St & United States Highway 101)
San Francisco, CA 94109
Wayland did a JDM swap for my buddies old MR2.
This was like years ago but IIRC Wayland takes his time to make sure the work is done right the first time around.
And if there are any problems he makes things right.
(They have 2 locations)
4818 Geary Blvd
(between 12th Ave & Funston Ave)
San Francisco, CA 94118
and
1675 Pacific Ave
(between Polk St & United States Highway 101)
San Francisco, CA 94109
Wayland did a JDM swap for my buddies old MR2.
This was like years ago but IIRC Wayland takes his time to make sure the work is done right the first time around.
And if there are any problems he makes things right.
#5
Marlins is a fantastic shop, they know exactly what they are doing... On that a few suggestions.
1)Make 100% sure whoever does your rebuild, uses the 83 22r timing chain NOT the 84 and on one. The 83 uses metal guides, and is a double chain, its far superior to the post 83 units that are single chain and use nylon guides.
2)Don't screw around with trying to "go big". Built it stock, and if your going to wheel it, just run a dual t-case (marlin crawler).
3)why not just buy my 4runner
Last edited by Overbear; 07-23-2009 at 08:00 AM.
#7
Most of them are built with crap china built cranks, low grade non standard cams and bearings, and won't last past 50,000 miles. I urge most to stay away from the "built out longblocks". If you are going to go this route, get a crate motor directly from toyota.
#8
Registered User
Thread Starter
iTrader: (23)
Join Date: Feb 2009
Location: South SF
Posts: 2,674
Car Info: 97' Dodge Cummins and an RSTI thingie
I love marlin and I know they do great work. This is my 4th yota and I'm getting it for a good price and its an 85 with efi and the solid front axle. I want to do the 3rz motor swap but I don't have the time or money at the moment. I basically want the cheapest option to get me by until I can do the swap
#9
I love marlin and I know they do great work. This is my 4th yota and I'm getting it for a good price and its an 85 with efi and the solid front axle. I want to do the 3rz motor swap but I don't have the time or money at the moment. I basically want the cheapest option to get me by until I can do the swap
#13
You have to remember the 7M block is a truck block, originally designed for the land cruzer not the supra. Trust me, has tons of low end torq, so much so you need cro-mo axles and a good strong cryo'ed R&P or you will be picking up bits off the trail.
#14
Registered User
Thread Starter
iTrader: (23)
Join Date: Feb 2009
Location: South SF
Posts: 2,674
Car Info: 97' Dodge Cummins and an RSTI thingie
I have a friend in the midwest who put in an 8mgte and he said he wish that he'd not gone the turbo route, though he might have had a bigger turbo and lag to go with it.
I checked the toy shop and they're actually the most expensive quote that I've gotten so far, almost 2gs for the motor and then 800 to install. The guy did seem pretty cool but he said a 3rz swap would take too much of their time to do because its too custom.
I checked the toy shop and they're actually the most expensive quote that I've gotten so far, almost 2gs for the motor and then 800 to install. The guy did seem pretty cool but he said a 3rz swap would take too much of their time to do because its too custom.
#15
that's why you swap in marlin's dual crawler box conversion kit from a A240H to an A240F tranny...
:hee hee:
i can set both boxes to LO-LO, start the car, get out, walk around and the car has moved about a couple feet...
makes a good ghost riding video...
:hee hee:
i can set both boxes to LO-LO, start the car, get out, walk around and the car has moved about a couple feet...
makes a good ghost riding video...