sti bbs rims on 2006 2.5i?
01-09-2010, 07:24 PM
#5
Friendly Neighborhood Ogre
iTrader: (6)
Join Date: Mar 2000
Location: www.gunatics.com
Posts: 19,930
Car Info: GUNATICS.COM
Correct. If it's from an 04 STi then the bolt pattern will be 5x100, which will fit any other Subaru Impreza model (WRX, 2.5RS, etc). However, after 2005, the bolt pattern changed and was specific to the STi ONLY, so you can't use those STi BBS wheels on a WRX or any other subaru of that sort.
The hood will bolt right on and will be an easy swap, that hardest part will be swapping over the windshield washer nozzles and intercooler spray lines, and that's not hard AT ALL, so it'll be very easy to do, very straight forward and can be done in ten mins with the right tools.
The hood will bolt right on and will be an easy swap, that hardest part will be swapping over the windshield washer nozzles and intercooler spray lines, and that's not hard AT ALL, so it'll be very easy to do, very straight forward and can be done in ten mins with the right tools.
01-10-2010, 12:10 AM
#7
Correct. If it's from an 04 STi then the bolt pattern will be 5x100, which will fit any other Subaru Impreza model (WRX, 2.5RS, etc). However, after 2005, the bolt pattern changed and was specific to the STi ONLY, so you can't use those STi BBS wheels on a WRX or any other subaru of that sort.
The hood will bolt right on and will be an easy swap, that hardest part will be swapping over the windshield washer nozzles and intercooler spray lines, and that's not hard AT ALL, so it'll be very easy to do, very straight forward and can be done in ten mins with the right tools.
The hood will bolt right on and will be an easy swap, that hardest part will be swapping over the windshield washer nozzles and intercooler spray lines, and that's not hard AT ALL, so it'll be very easy to do, very straight forward and can be done in ten mins with the right tools.
01-10-2010, 03:59 AM
#8
Correct. If it's from an 04 STi then the bolt pattern will be 5x100, which will fit any other Subaru Impreza model (WRX, 2.5RS, etc). However, after 2005, the bolt pattern changed and was specific to the STi ONLY, so you can't use those STi BBS wheels on a WRX or any other subaru of that sort.
The hood will bolt right on and will be an easy swap, that hardest part will be swapping over the windshield washer nozzles and intercooler spray lines, and that's not hard AT ALL, so it'll be very easy to do, very straight forward and can be done in ten mins with the right tools.
The hood will bolt right on and will be an easy swap, that hardest part will be swapping over the windshield washer nozzles and intercooler spray lines, and that's not hard AT ALL, so it'll be very easy to do, very straight forward and can be done in ten mins with the right tools.
Thread
Thread Starter
Forum
Replies
Last Post
FinalBean
NorCal Classifieds
6
04-30-2009 11:27 PM
gotrice?
NorCal Classifieds
3
02-20-2009 09:28 PM
DominiksSTI
Used Aftermarket Car Parts For Sale
0
12-07-2005 10:37 PM
