Porting TGV'S.... Help
06-28-2009 | 04:43 PM
#1
Thread Starter
Registered User
iTrader: (11)
Joined: Apr 2005
Posts: 3,863
From: Land Of The Dead
Car Info: Cage and Slicks and Wing OH MY!!
Porting TGV'S.... Help
Hey anyone good at porting tgv's and intake manifolds? Anyone willing to help?
Tips or pointers?
Thanks in advance
Tips or pointers?
Thanks in advance
06-28-2009 | 09:44 PM
#4
Registered User
iTrader: (8)
Joined: Oct 2006
Posts: 2,506
From: BorderJumperEnforcer's momma's house
Car Info: Fast
Ya, save your time/money on the TGV porting. One side has a LITTLE bit that can be taken out before the gasket is your restriction, the other side is negligible. You may want to take out the divider and the lip where the butterflies seat, but that is up to you. No big difference...except I have heard of idle issues (from a reliable source) when the divider was removed.
I like to hold the gasket up against the TGV, take a sharpie, and mark the areas that need to be taken out.
I used a die grinder with a cylindrical bit, but a tapered bit may work better. Get the toughest bit you can.
I like to hold the gasket up against the TGV, take a sharpie, and mark the areas that need to be taken out.
I used a die grinder with a cylindrical bit, but a tapered bit may work better. Get the toughest bit you can.
06-29-2009 | 08:15 AM
#9
The only reason it says Banned is because he ended his silver vendor status. It was costing him too much and he wasn't making nearly enough money to actually make a profit in the end of each month.
He still does the services and posts up on Nasioc. PM him and I'll let him know you guys are trying to get a hold of him, he has been working a lot lately.
Ryan
06-29-2009 | 03:00 PM
#10
Thread Starter
Registered User
iTrader: (11)
Joined: Apr 2005
Posts: 3,863
From: Land Of The Dead
Car Info: Cage and Slicks and Wing OH MY!!
Paul,
70 dollars for OEM Legacy tgv's??????? I find that hard to believe.
Not that im saying your lying, but coming from subaru, 700 sounds abouot right!!!
70 dollars for OEM Legacy tgv's??????? I find that hard to believe.
Not that im saying your lying, but coming from subaru, 700 sounds abouot right!!!
06-29-2009 | 03:44 PM
#14
i-Club Sympathizer
Joined: Jan 2007
Posts: 3,165
From: Mazda NAO
Car Info: 1969 BMW R75/5 & Work Whip
All US spec cars have the TGVs. Paul might have had a customer with a set from Japan, which did have 'risers' on some cars. Might be orderable through SOA, but I can't seem to find the part number right now. I'll look into it a bit more for you.