My friend looking for an evo 8, maybe used, whats a good evo forum?
12-29-2004, 09:50 PM
#19
Registered User
Join Date: Apr 2004
Location: Norcalif
Posts: 2,736
Car Info: with the blinkers on
it's not shrunk, it's shrank ( I think I just gave yor case evidence)
12-29-2004, 10:02 PM
#21
Guest
Posts: n/a
Originally Posted by 02BlackWRX
haha that's the one. I love the part where he says the one compression reading was done on a *warm* engine before he swapped the timing belt and the second one was after he swapped the belt but on a *cold* engine and the compression readings where different and it had to be the belt!
*me slaps forehead*
12-29-2004, 10:10 PM
#23
Guest
Posts: n/a
Originally Posted by Imprezer
Actually, if the belt is installed incorrectly, and/or if the teeth are misalligned, the compression readings will be different.
Want to explain to me how? A couple of degrees wouldn't do anything. Hell I don't even think if it's off 10degrees it would show any difference and sure as hell not 20psi across the cylinders.
Last edited by razorlab; 12-29-2004 at 10:13 PM.
12-29-2004, 10:20 PM
#24
Admin v2.0
iTrader: (9)
Join Date: Nov 2002
Location: Alameda, CA, USA
Posts: 6,965
Car Info: 02 Black Legacy GT
Yes it would.
If your cam timing is off due to the t-belt in the wrong place, your intake valves will open too soon and you won't have **** for compression.
There are few other combos on what could happen, but yeah.
You can have your compression raised as well.
If your cam timing is off due to the t-belt in the wrong place, your intake valves will open too soon and you won't have **** for compression.
There are few other combos on what could happen, but yeah.
You can have your compression raised as well.
12-29-2004, 10:37 PM
#25
Guest
Posts: n/a
Originally Posted by Imprezer
Yes it would.
If your cam timing is off due to the t-belt in the wrong place, your intake valves will open too soon and you won't have **** for compression.
There are few other combos on what could happen, but yeah.
You can have your compression raised as well.
If your cam timing is off due to the t-belt in the wrong place, your intake valves will open too soon and you won't have **** for compression.
There are few other combos on what could happen, but yeah.
You can have your compression raised as well.
12-29-2004, 11:14 PM
#27
Guest
Posts: n/a
Originally Posted by Imprezer
bwhahah what?
12-30-2004, 03:36 AM
#29
Admin v2.0
iTrader: (9)
Join Date: Nov 2002
Location: Alameda, CA, USA
Posts: 6,965
Car Info: 02 Black Legacy GT
I was lauging at that lame excuse for an answer you posted.
I am not really sure what you are trying to do, but you are definetely getting under my skin. However, a joker like you would take along time to really **** me off, as I can from your posts, that you don't bring anything bright to this discussion table.
So go, and bwahaha about something else before I make you look like a fool, because in this case I am right and you cannot prove otherwise.
Kapish?
12-30-2004, 03:45 AM
#30
Friendly Neighborhood Ogre
iTrader: (6)
Join Date: Mar 2000
Location: www.gunatics.com
Posts: 19,930
Car Info: GUNATICS.COM
Alex, don't take it personally... He's a dick to everyone. (Though he hasn't been a dick to me, probably because he knows I'd be a dick back to him 300 times worse... Man, I'm a real piece of **** now that I think about it... )