i need help - a stud came out of my turbo.

Thread Tools
 
Search this Thread
 
Old 12-15-2006, 03:09 PM
  #1  
Registered User
Thread Starter
iTrader: (3)
 
Felton Local's Avatar
 
Join Date: Jul 2006
Location: santa cruz mountains
Posts: 134
Car Info: 2003 wrx
i need help - a stud came out of my turbo.

i was putting my stock downpipe back on, got everything all tightened up and back together and drove it into town and back home. I let it sit for a little bit and went to go check it out and make sure everything was still together and O.K. Of course it wasnt, at first it just looked like a loose nut but i started to loosen it and the whole stud started turning and eventually came out.
i just called subaru and made an appointment to bring it in. They said it should be covered on warranty but the problem is is that I still have the aftermarket uppipe on and im afraid it's going to affect my warranty, and im going to be going this weekend leaving me with only hours to take it off before i drop off my car.
Is anyone on here able to do an extremely fast uppipe swap late sunday afternoon? I can do it , but it will most likely take me hours on end.
If you're interested send me a P.M. and ill get back to you ASAP.... There's some dinner or a few bucks in it for you and i could come to you.

thanks
Felton Local is offline  
Old 12-15-2006, 03:17 PM
  #2  
Hurray, it's Ian!!
iTrader: (4)
 
yayitzian's Avatar
 
Join Date: Oct 2003
Location: on an airplane
Posts: 3,612
Car Info: 2002 MBP WRX Sedan
either way, they'll know you swapped the uppipe out no matter what. all the bolts are torqued to their specific setup. when i took my car to the dealership, I had put it back to stock, but they knew exactly what I did to it.
yayitzian is offline  
Old 12-15-2006, 03:56 PM
  #3  
Registered User
Thread Starter
iTrader: (3)
 
Felton Local's Avatar
 
Join Date: Jul 2006
Location: santa cruz mountains
Posts: 134
Car Info: 2003 wrx
damn, that's not what i wanted to hear.
Felton Local is offline  
Old 12-15-2006, 04:09 PM
  #4  
Registered User
iTrader: (1)
 
raazin's Avatar
 
Join Date: Jun 2003
Location: blaine,WA
Posts: 935
Car Info: 2002 wrx wagon black
did u try to put the stud back on it should screw back in place if its not strip good luck cheers@ENJOY!!

Last edited by raazin; 12-15-2006 at 04:29 PM.
raazin is offline  
Old 12-15-2006, 04:28 PM
  #5  
Registered User
 
Snot Rod's Avatar
 
Join Date: Jul 2006
Location: .
Posts: 1,839
Car Info: .
Originally Posted by Felton Local
damn, that's not what i wanted to hear.
You'll need to use a 'Heli-coil' or 'Time-sert' kit to repair the stripped-out hole.

If the dealer knows you tinkered with the car, you're gonna have to pay up.
Snot Rod is offline  
Old 12-15-2006, 08:09 PM
  #6  
Registered User
iTrader: (12)
 
WRXakaBooSTi's Avatar
 
Join Date: Apr 2004
Location: Bay Area, CA
Posts: 1,089
Car Info: Subaru?
im guessing the only way that stud broke is because you decided to put a uppipe or downpipe on your car... just pay up yourself, its your fault.
WRXakaBooSTi is offline  
Old 12-15-2006, 08:10 PM
  #7  
rau
Something Custom
iTrader: (9)
 
rau's Avatar
 
Join Date: Aug 2003
Location: Las Vegas NV
Posts: 14,505
Car Info: 2018 Grand Cherokee Limited Ecodiesel EOC Stage 1
Originally Posted by Snot Rod
You'll need to use a 'Heli-coil' or 'Time-sert' kit to repair the stripped-out hole.

If the dealer knows you tinkered with the car, you're gonna have to pay up.
tske it to Santa Cruz Subary, theyre mod friendly
rau is offline  
Old 12-16-2006, 01:30 PM
  #8  
the artist formerly known as mcdrama
iTrader: (23)
 
mattsn0w's Avatar
 
Join Date: Apr 2004
Location: Santa Cruz Mountains, CA.
Posts: 6,428
Car Info: WRBP 2015 WRX Premium/CVT
they wont care. tell them what happened, you're not asking for a new turbo, just to replace/fix the bolt that came out.

You really don't need to take it to the dealer though, if you managed to install the downpipe, it is something you can fix with a little bit of work.
mattsn0w is offline  
Old 12-17-2006, 12:40 PM
  #9  
Registered User
Thread Starter
iTrader: (3)
 
Felton Local's Avatar
 
Join Date: Jul 2006
Location: santa cruz mountains
Posts: 134
Car Info: 2003 wrx
yeah i no i can fix but my heli-coil kit is not where it should be. Believe me, first thing after i noticed i stripped out the stud i went straight for my heli-coil kit.
So you think i should be ok to bring it to Santa Cruz subaru with my uppipe still on?
Felton Local is offline  
Old 12-17-2006, 01:01 PM
  #10  
Registered User
iTrader: (1)
 
raazin's Avatar
 
Join Date: Jun 2003
Location: blaine,WA
Posts: 935
Car Info: 2002 wrx wagon black
try putting a nut and bolt if its going to work cheers@ENJOY!!
raazin is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
trans4m
Bay Area
5
06-04-2014 11:49 PM
emillitello
Suspension, Handling, and Brakes
1
05-02-2014 05:12 PM
02subieguy
Sacramento & Reno
6
02-15-2012 12:20 PM
asoka05
Bay Area
26
06-25-2011 02:10 PM
crashnscar
Bay Area
9
10-01-2007 05:07 PM



Quick Reply: i need help - a stud came out of my turbo.



All times are GMT -7. The time now is 03:45 PM.