Humboldt County thread
#856
Registered User
Thread Starter
iTrader: (8)
Join Date: Oct 2006
Location: BorderJumperEnforcer's momma's house
Posts: 2,506
Car Info: Fast
I tried my work scanner today...but that nearly ended with me chucking out the window like King Kong haha!! I definately kicked it around, and damn near pulled an office space. Lets just say that it was not a good place or time for the all in one to test my patience!!
Ahem, anyway...
Ahem, anyway...
#861
Registered User
Thread Starter
iTrader: (8)
Join Date: Oct 2006
Location: BorderJumperEnforcer's momma's house
Posts: 2,506
Car Info: Fast
ah **** nevermind, I did not realize it was up in Arcata. It is too late for me to drive an hour and a half round trip....especially when I have to get up at 5 am.
Maybe next time!!
Maybe next time!!
#862
The Big Pete's we were at is in Eureka on 5th and R also known as Samoa (255) and 101 north. Met up with Forrest.
We're going to try working out a little cruise or something in the near future. We can try another meet in a few weeks. Maybe the first Sunday in March?
We're going to try working out a little cruise or something in the near future. We can try another meet in a few weeks. Maybe the first Sunday in March?
#863
The Big Pete's we were at is in Eureka on 5th and R also known as Samoa (255) and 101 north. Met up with Forrest.
We're going to try working out a little cruise or something in the near future. We can try another meet in a few weeks. Maybe the first Sunday in March?
We're going to try working out a little cruise or something in the near future. We can try another meet in a few weeks. Maybe the first Sunday in March?
March 7th....I would prefer to meet in Arcata this time at Toni's 24 hour.
Taylors 02wrx is fast (to my defense I hit the rev limiter in 2nd)
#865
Registered User
Join Date: Sep 2005
Location: California
Posts: 204
Car Info: 02' JDM STi Ver. 7/8 Conversion
Super what Sunday? I thought you were selling your car anyway!!
Hey ViperWRX, use one gasket (if it will fill the gap) and use grey RTV. The stuff will fill gaps nicely, and it is VERY DIFFICULT to remove...hopefully meaning it will be just as tough to break the seal on. I made a ghetto DP to Catback gasket for my install, and when I tried to replace it with an actual gasket I gave up because even my knife would not cut through it!!
That or try copper seal spray.
I still want that RS by the way
Hey ViperWRX, use one gasket (if it will fill the gap) and use grey RTV. The stuff will fill gaps nicely, and it is VERY DIFFICULT to remove...hopefully meaning it will be just as tough to break the seal on. I made a ghetto DP to Catback gasket for my install, and when I tried to replace it with an actual gasket I gave up because even my knife would not cut through it!!
That or try copper seal spray.
I still want that RS by the way
I still have the RS btw, yesterday it was Super cleaned by my wife inside and out. It doesnt have a Forsale sign on the car at this time, was just getting some interest in the forums first. Have a person considering 5k for it, which I am willing to drop the price from 5.5k anyways since it was an OBO.
#866
Registered User
Join Date: Sep 2005
Location: California
Posts: 204
Car Info: 02' JDM STi Ver. 7/8 Conversion
What are the mods (I know what yours are Forrest )
I did that once, got Screwed! Best bet is put yours up for sale and then buy a trunk with the wing, ooor just drill the holes and buy a wing. I can paint it for you, I know the right place for the paint! $24 a 12oz basecoat can and $14 for clearcoat 12 oz can, and it may take 2 cans each.
I just painted my new Prodrive front lip, and Side Strakes!! With 1 can basecoat and clear btw! I get the new JDM STi Ver. 7 Grill Today also!
I just painted my new Prodrive front lip, and Side Strakes!! With 1 can basecoat and clear btw! I get the new JDM STi Ver. 7 Grill Today also!
#867
Registered User
Thread Starter
iTrader: (8)
Join Date: Oct 2006
Location: BorderJumperEnforcer's momma's house
Posts: 2,506
Car Info: Fast
Well I should be recieving the new gasket soon and if that doesnt work then I am FOR SURE going to use a sealant of some sort and permatex is what I was looking into using to fill the slight gap. Don't think I would need to take if off after.
I still have the RS btw, yesterday it was Super cleaned by my wife inside and out. It doesnt have a Forsale sign on the car at this time, was just getting some interest in the forums first. Have a person considering 5k for it, which I am willing to drop the price from 5.5k anyways since it was an OBO.
I still have the RS btw, yesterday it was Super cleaned by my wife inside and out. It doesnt have a Forsale sign on the car at this time, was just getting some interest in the forums first. Have a person considering 5k for it, which I am willing to drop the price from 5.5k anyways since it was an OBO.
#868
Power mods:
Stage 1 EQ Tuning Built EJ257
Stage 1 EQ Tuning STi heads
APS TBE
APS up pipe
FP Green 3" inlet
750cc Deatschwerks Injectors
Walbro Fuel Pump
TurboXS FMIC
EQ Tuning intake
EQ Tuning MAF
Hallman MBC
AccessPort tuned by Ed @ EQTuning.
Stage 1 EQ Tuning Built EJ257
Stage 1 EQ Tuning STi heads
APS TBE
APS up pipe
FP Green 3" inlet
750cc Deatschwerks Injectors
Walbro Fuel Pump
TurboXS FMIC
EQ Tuning intake
EQ Tuning MAF
Hallman MBC
AccessPort tuned by Ed @ EQTuning.
Last edited by SomethingClassy; 02-08-2010 at 12:35 PM.
#869
Registered User
Join Date: Sep 2005
Location: California
Posts: 204
Car Info: 02' JDM STi Ver. 7/8 Conversion
Very nice, I have 750 Deats also! Whats your redline? And what is your boost set at?
#870
I'm at 18 PSI and tuned on the conservative side until I get my STi tranny dropped in. Here's the chart. I think the numbers are supposed to be consistant with low reading mustang dynos.
Last edited by SomethingClassy; 02-08-2010 at 12:58 PM.