Humboldt County thread
#849
Registered User
iTrader: (1)
Join Date: Jul 2006
Location: CA
Posts: 895
Car Info: EQ tuned limited 06 WRB wagon
No way, with the recent death of MJ I felt as though the above reference was totally current and with the times. Is it bad I was about to make my facebook status a quote from a Pat Benatar song? Whatever, I'm only 28! I'm just nostalgic
#850
Registered User
Join Date: Sep 2005
Location: California
Posts: 204
Car Info: 02' JDM STi Ver. 7/8 Conversion
Well, I dont think I would be able to make it till maybe the end of the month, if there is a meet or anything. I have an exhaust leak at the downpipe and had ordered another gasket, this will be #3 in there the guy I had weld did a **** poor job this time, its off by a few MM and he wants to charge again to fix. One more gasket I hope will fix the leaky problem.
#851
If we do something on a semi-regular basis we're bound to have people who can't make some nights show up on others. We'll see how this goes and maybe set something up for later in the month or March.
What kind of gaskets are you using?
What kind of gaskets are you using?
#853
Registered User
Thread Starter
iTrader: (8)
Join Date: Oct 2006
Location: BorderJumperEnforcer's momma's house
Posts: 2,506
Car Info: Fast
Super what Sunday? I thought you were selling your car anyway!!
Hey ViperWRX, use one gasket (if it will fill the gap) and use grey RTV. The stuff will fill gaps nicely, and it is VERY DIFFICULT to remove...hopefully meaning it will be just as tough to break the seal on. I made a ghetto DP to Catback gasket for my install, and when I tried to replace it with an actual gasket I gave up because even my knife would not cut through it!!
That or try copper seal spray.
I still want that RS by the way
Hey ViperWRX, use one gasket (if it will fill the gap) and use grey RTV. The stuff will fill gaps nicely, and it is VERY DIFFICULT to remove...hopefully meaning it will be just as tough to break the seal on. I made a ghetto DP to Catback gasket for my install, and when I tried to replace it with an actual gasket I gave up because even my knife would not cut through it!!
That or try copper seal spray.
I still want that RS by the way
#854
Registered User
Thread Starter
iTrader: (8)
Join Date: Oct 2006
Location: BorderJumperEnforcer's momma's house
Posts: 2,506
Car Info: Fast
BTW I need a scanner to show off my new dyno chart. 335 whp on the GST heartbreaker Mustang dyno, and that is running out of injector at 6k RPMs. Bigger injectors, a 91 retune and a 400 WHP race tune are in the near future Anyone have some 850 or bigger topfeed injectors they will let go of cheap?
#855