Humboldt County thread
#241
Registered User
Thread Starter
iTrader: (8)
Join Date: Oct 2006
Location: BorderJumperEnforcer's momma's house
Posts: 2,506
Car Info: Fast
lol...actually, that is going to be what you hear. You guys wont see much of me this summer if I am lucky By that I mean if I am lucky I will be gone making bank!!
#242
Registered User
Join Date: Jan 2007
Location: humboldt county, CA
Posts: 309
Car Info: 2006 Evo IX SSL
Damn... guess that just means you're gonna have to leave me your car, to watch over it & take very good care of it :becky:
#243
Registered User
iTrader: (8)
Join Date: Jul 2006
Location: Slumboldt
Posts: 3,160
Car Info: I is not STiYLIN n e moar
The WRB'05 STi, I am coming for YOU! (Logan) I hope you come to the drags tomorrow and give me a rematch if you ain't skerr't. See you guys out there. I got me a secret weapon!111!!!!one!11.
#249
Registered User
iTrader: (8)
Join Date: Jul 2006
Location: Slumboldt
Posts: 3,160
Car Info: I is not STiYLIN n e moar
wow, car is slower now. Will get a time slip tommorw. Cop said I was trapping @ 94mph and I know I was doing 1.6s. I am so ready to throw in the towel. I played witht eh boost controller and got a tad more power. It's def not pulling hard and I was running 4 gallons of 104 with 2 gallons of 91. hit 1.4 bar as my highest. Going to log and get an actual time slip tomorrow. Even the sub was out!
#250
Registered User
Thread Starter
iTrader: (8)
Join Date: Oct 2006
Location: BorderJumperEnforcer's momma's house
Posts: 2,506
Car Info: Fast
It is because of the front mount turbo lag. Your WHP and WTQ are higher, but it takes longer to hit and doesn't pull as hard as a larger turbo would once you get there. Same thing I am dealing with...which is why I am considering going back to a top mount until I get my PPGs and a bigger turbo.
In my limited experience with a front mount on a VF-39, it smooths out the torque curve. You may get a little higher numbers, but since it takes a little while to "build", you dont really notice it like you would with a top mount. This may be why it feels it isn't pulling as hard according to the butt dyno
Also (I should have mentioned this earlier) from what I have learned, race gas really needs to be tuned for. Sure you can increase the boost, but that is not all of what is going on. I have actually been told (by very informed sources) that running too much race gas untuned can be WORSE than running 91 or 93. The race gas has a higher flash point, so to get the most out of it other things to be adjusted.
Limited amounts mixed to raise the octane and provide a knock barrier and crap gas protection should be OK.
Hopefully we can get some real details from an expert
Oh by the way, I didn't get my car back until 8 LOL. I should be able to make it on Thursday tho
In my limited experience with a front mount on a VF-39, it smooths out the torque curve. You may get a little higher numbers, but since it takes a little while to "build", you dont really notice it like you would with a top mount. This may be why it feels it isn't pulling as hard according to the butt dyno
Also (I should have mentioned this earlier) from what I have learned, race gas really needs to be tuned for. Sure you can increase the boost, but that is not all of what is going on. I have actually been told (by very informed sources) that running too much race gas untuned can be WORSE than running 91 or 93. The race gas has a higher flash point, so to get the most out of it other things to be adjusted.
Limited amounts mixed to raise the octane and provide a knock barrier and crap gas protection should be OK.
Hopefully we can get some real details from an expert
Oh by the way, I didn't get my car back until 8 LOL. I should be able to make it on Thursday tho
#251
Registered User
iTrader: (8)
Join Date: Jul 2006
Location: Slumboldt
Posts: 3,160
Car Info: I is not STiYLIN n e moar
It is because of the front mount turbo lag. Your WHP and WTQ are higher, but it takes longer to hit and doesn't pull as hard as a larger turbo would once you get there. Same thing I am dealing with...which is why I am considering going back to a top mount until I get my PPGs and a bigger turbo.
In my limited experience with a front mount on a VF-39, it smooths out the torque curve. You may get a little higher numbers, but since it takes a little while to "build", you dont really notice it like you would with a top mount. This may be why it feels it isn't pulling as hard according to the butt dyno
Also (I should have mentioned this earlier) from what I have learned, race gas really needs to be tuned for. Sure you can increase the boost, but that is not all of what is going on. I have actually been told (by very informed sources) that running too much race gas untuned can be WORSE than running 91 or 93. The race gas has a higher flash point, so to get the most out of it other things to be adjusted.
Limited amounts mixed to raise the octane and provide a knock barrier and crap gas protection should be OK.
Hopefully we can get some real details from an expert
Oh by the way, I didn't get my car back until 8 LOL. I should be able to make it on Thursday tho
In my limited experience with a front mount on a VF-39, it smooths out the torque curve. You may get a little higher numbers, but since it takes a little while to "build", you dont really notice it like you would with a top mount. This may be why it feels it isn't pulling as hard according to the butt dyno
Also (I should have mentioned this earlier) from what I have learned, race gas really needs to be tuned for. Sure you can increase the boost, but that is not all of what is going on. I have actually been told (by very informed sources) that running too much race gas untuned can be WORSE than running 91 or 93. The race gas has a higher flash point, so to get the most out of it other things to be adjusted.
Limited amounts mixed to raise the octane and provide a knock barrier and crap gas protection should be OK.
Hopefully we can get some real details from an expert
Oh by the way, I didn't get my car back until 8 LOL. I should be able to make it on Thursday tho
thnkx for the info. Drags today where you get timed. Hopefully you can make it. Going to go put my slotted rotors on now.