My brother's car has been having some timing issues and is registering knock at low rpms and causing the DAM to drop ~0.06-0.2. Thread with data log here:

https://www.i-club.com/forums/bay-ar...please-237886/

Anyway, we are trying to rule out a loose knock sensor and cannot seem to find it even after doing a bunch of searches online. Can anyone point it out in this picture? It's a 2006 wrx.

photo.jpg?t=1325277770

 

if i recall correctly, the pic doesnt show it, but itll be under the manifold beneath all that loomed wires/hoses with a 12mm bolt running directly through it holding it down.

its deep in there..thats all i remember..been a few years

 

iirc its brown in color

 

stolen from iwsti.



How to: Intake Removal / Re-install specs post #6 - Subaru Impreza WRX STI Forums: IWSTI.com


not sure if wrx is the same.

 

Found it, had to take off the throttle body. I think we will just re torque it to spec and hope that solves the problem.

 

Make sure it is pointing in the correct direction

 

Re torqued the bolt and so far so good. Thanks for the help everyone!