hYpE-R-29

iTrader: (2)

OK..I have a autometer ultra-lite boot/vac gauge, couple of days ago when stepping on the gas the autometer read 13 something PSI. Now when stepping on the gas (all the way) the gauge reads 10psi. I talked to Soren at MPJ (who did the install of gauges) thinks one of the hoses connected to the BOV is leaking causing the reading to be wrong......Any advice on this


Thanks

soundwave

iTrader: (14)

check the hoses connected to the BOV 1st... lol

dorifto88

iTrader: (8)

iirc, with my hommies acessport i hit a peak of 12.9, and i was completly stockkkkkk except for the 'stage 1' flash

dan2304k

iTrader: (2)

Cobb stage 1 should give you 15 psi.

hYpE-R-29

iTrader: (2)

New update...after looking the hoses...i seen something different....well one side of the BOV hose connects to the autometer hose...then connects to a T fitting, from the T fitting it connects to a UFO looking thing(dont know what its called)...that UFO looking thing is in half and the white thing inside is sticking out....could his affect the PSI reading 10 psi at full throttle.


Thanks guys

AzN121184

iTrader: (17)

with that description, i'd highly suggest a picture along with it

hYpE-R-29

iTrader: (2)

ok here is a pic

hYpE-R-29

iTrader: (2)

here is is

dorifto88

iTrader: (8)

are you discrediting my ability to read english?

dan2304k

iTrader: (2)

Uh, no, I'm puzzled as to why you only reach 12.9

AzN121184

iTrader: (17)

do you have a hks ssqv bov?

dorifto88

iTrader: (8)

i am 100% stock. My friends who are completly catless got 14.9 psi for days, though

dan2304k

iTrader: (2)

You said you have stage 1 flash. If you do, you should get 15psi.

dorifto88

iTrader: (8)

we can go back and forth on this for days on end.

when i had the acess port, it read a peak of 12.9 on the acessport itself.

sfwrx2

iTrader: (8)

hey man bring it over