Getting Borla Hush to flow better. . . ?
#1
VIP Member
Thread Starter
iTrader: (7)
Join Date: Jul 2003
Location: Hwy 39, CA
Posts: 1,639
Car Info: Stage 4+ Bugeye
Getting Borla Hush to flow better. . . ?
Hey guys, I have a borla hush on my 03 wrx.
I want to remove the baffle to get it to straight pipe
I want to get the flange welded in so it is a true 3'' all the way.
Who has done this ? Flow tests ? Where to get it done ? If you can give me a price and where to go. Thanks
WRX Rush
I want to remove the baffle to get it to straight pipe
I want to get the flange welded in so it is a true 3'' all the way.
Who has done this ? Flow tests ? Where to get it done ? If you can give me a price and where to go. Thanks
WRX Rush
#4
Registered User
iTrader: (7)
Join Date: Nov 2002
Location: San Jose-near milpitas
Posts: 820
Car Info: 03 Wrx black sedan + 2013 BRZ
Originally Posted by WRX Rush
Now that I have the adapter taken care of. . .
Does anyone know where to get my exhaust cut/welded ?
WRX Rush
Does anyone know where to get my exhaust cut/welded ?
WRX Rush
Jason
#8
Former Sponsor
iTrader: (3)
Join Date: Nov 2002
Location: gbmotorsports Hayward, CA
Posts: 2,085
Car Info: I got a couple :)
if you want the hush system to be resonator "less", I can cut and weld a straight pipe (3") and keep the resonator in exchange for the parts.
Labor will be $40 to cut and weld as a package only .
let me know
Gino
www.gb-motorsports.com
www.mpjperformance.com
Labor will be $40 to cut and weld as a package only .
let me know
Gino
www.gb-motorsports.com
www.mpjperformance.com
#10
VIP Member
Thread Starter
iTrader: (7)
Join Date: Jul 2003
Location: Hwy 39, CA
Posts: 1,639
Car Info: Stage 4+ Bugeye
Hey guys,
Just an update on my exhaust, I went to see Gino at GB, even though the didn't have the pipe in stock the adapter that gino welded for me is awesome.
The welds are the better that I have ever seen, I would suggest this "mod" to any borla owner. Now once Gino gets 17 inches of stainless steel then I get my resonator cut out. Cheers guys
WRX Rush
Just an update on my exhaust, I went to see Gino at GB, even though the didn't have the pipe in stock the adapter that gino welded for me is awesome.
The welds are the better that I have ever seen, I would suggest this "mod" to any borla owner. Now once Gino gets 17 inches of stainless steel then I get my resonator cut out. Cheers guys
WRX Rush
#12
VIP Member
iTrader: (17)
Join Date: Jul 2004
Location: Northern California
Posts: 3,969
Car Info: 04 STi
Originally Posted by thebankman
Wouldn't this eliminate the "hush factor" of the muffler?
Actually, I drove my friends yellow WRX with borla hush and he got it from MPJ with the 3" adapter weld. It's not that loud actually. It's much quieter than a lot of exhausts, so it's still hush .
-GDO
#13
more than meets the eye
iTrader: (14)
Join Date: Nov 2003
Location: Bay Area
Posts: 6,054
Car Info: ?
Gino - how much to weld a flange onto a midpipe that broke off ? also do you have spring bolts? i was told they are supposed to be on the stock midpipe connecting to the downpipe.
However, after you guys installed the helix up/dp combo, it didn't have any spring bolts...
thx
However, after you guys installed the helix up/dp combo, it didn't have any spring bolts...
thx
Thread
Thread Starter
Forum
Replies
Last Post
johndabrit
NorCal Classifieds
15
04-08-2010 09:13 AM
06scooby
Ongoing Projects
10
10-06-2006 10:47 AM
Crisisback
NorCal Classifieds
6
07-20-2004 08:25 PM