Finally' My car has Power! Thanks GST
#1
Registered User
Thread Starter
iTrader: (10)
Join Date: Sep 2005
Location: san jose
Posts: 623
Car Info: 2004 WRX
Finally' My car has Power! Thanks GST
Well I thought i should show you guys the numbers my car put down on the dyno!
Thanks to all the guys at GST for their help on the start of my new beast!
Thanks for your heads+cams Mike they really made a difference
So the first to is on pump 91 and the second set of sheets are 91+meth
Thanks to all the guys at GST for their help on the start of my new beast!
Thanks for your heads+cams Mike they really made a difference
So the first to is on pump 91 and the second set of sheets are 91+meth
Last edited by FTR'sWRX; 02-24-2007 at 12:37 PM.
#9
Registered User
iTrader: (17)
Join Date: Apr 2003
Location: Downtown oakland
Posts: 6,249
Car Info: civic
Originally Posted by wrxguy
I believe he has a 20g and a 2.5hybrid (wrx heads and 2.5 shortblock)
btw, do u still go to sfsu? i never see your car anymore. i see jake's blue bugeye and 1newrx
#10
Registered User
iTrader: (5)
Join Date: Jul 2004
Location: San Jose/ San Leandro
Posts: 3,300
Car Info: SGM 135i
Yea, i'd also like to know what kind of transmission he's using. I'm thinking of the hybrid route cept with jdm heads for higher revs. But i dont know if my RA gearset can handle that kind of power.
#14
Registered User
Thread Starter
iTrader: (10)
Join Date: Sep 2005
Location: san jose
Posts: 623
Car Info: 2004 WRX
Thanks guys! and yes i am still using my 5speed I know i need a stronger tranny thinking of going with a PPG.
My mods are
-EJ25 with 100mm JE pistons
-Cosworth bearings
-Mikes race car heads that are ported ans polished and JUN cams not sure what they are neither does Mike! Ps thanks mike for the heads
-td05-20g
-walbro fuel pump
-PE800cc
-PERRIN inlet hose
-Turbo-xs front mount
-K&N big maf
-GT-Spec headers w/up-pipe
-Perrin down pipe
-thermal research 3" cat back
-Cobb AP
-meth- kit
thats all i can remember on the top of my head
All this was accomplished with GsT help!
Next mods are
GT30 turbo
PPG tranny
My mods are
-EJ25 with 100mm JE pistons
-Cosworth bearings
-Mikes race car heads that are ported ans polished and JUN cams not sure what they are neither does Mike! Ps thanks mike for the heads
-td05-20g
-walbro fuel pump
-PE800cc
-PERRIN inlet hose
-Turbo-xs front mount
-K&N big maf
-GT-Spec headers w/up-pipe
-Perrin down pipe
-thermal research 3" cat back
-Cobb AP
-meth- kit
thats all i can remember on the top of my head
All this was accomplished with GsT help!
Next mods are
GT30 turbo
PPG tranny