bay area bodykit install shops?
#1
Registered User
Thread Starter
Join Date: Apr 2005
Location: San Jose, CA
Posts: 94
Car Info: 05 silver 2.5 RS
bay area bodykit install shops?
anyone kno any good shops that install body kits in the bay area? mainly san jose, milpitas, even freemont area? i wanna have my sti bumper splitters installed properly.
#3
VIP Member
iTrader: (17)
Join Date: Jul 2004
Location: Northern California
Posts: 3,969
Car Info: 04 STi
Originally Posted by sil25rs
anyone kno any good shops that install body kits in the bay area? mainly san jose, milpitas, even freemont area? i wanna have my sti bumper splitters installed properly.
All you have to do is show some sack when it comes to drilling into your bumper and you should be all right with doing the bumper splitter install yourself.
#4
Registered User
Thread Starter
Join Date: Apr 2005
Location: San Jose, CA
Posts: 94
Car Info: 05 silver 2.5 RS
Originally Posted by Onizuka
Are you going to drill holes into your bumper or do you want to just double side it?
All you have to do is show some sack when it comes to drilling into your bumper and you should be all right with doing the bumper splitter install yourself.
All you have to do is show some sack when it comes to drilling into your bumper and you should be all right with doing the bumper splitter install yourself.
#5
VIP Member
iTrader: (17)
Join Date: Jul 2004
Location: Northern California
Posts: 3,969
Car Info: 04 STi
Hehe, with the bumper, you just have to measure twice and drill once. Even if you did mess up, you won't be able to see it since the splitters will cover it. Worse comes to worst, I'm sure someone out there will be willing to trade their perfectly non-STi style bumper for your bumper + the splitters
You'll be fine.
You'll be fine.
#8
Registered User
iTrader: (1)
Join Date: May 2005
Location: My lugnuts require more torque then your Honda makes
Posts: 1,404
Car Info: 05 WRX
I just did mine this weekend, 1-10 with 10 being the hardest I rank it a 1. You don't need to cut holes into your bumper just use double sided tape, bolts, washers, and self locking nuts. If you cut holes and ever decided to take it off, it's not going to look good. The install took about 30 minutes. Here is a pic i took the next day
=]
=]
#9
Registered User
Thread Starter
Join Date: Apr 2005
Location: San Jose, CA
Posts: 94
Car Info: 05 silver 2.5 RS
Originally Posted by gqchynaboy
I just did mine this weekend, 1-10 with 10 being the hardest I rank it a 1. You don't need to cut holes into your bumper just use double sided tape, bolts, washers, and self locking nuts. If you cut holes and ever decided to take it off, it's not going to look good. The install took about 30 minutes. Here is a pic i took the next day
=]
=]
#10
Registered User
iTrader: (1)
Join Date: May 2005
Location: My lugnuts require more torque then your Honda makes
Posts: 1,404
Car Info: 05 WRX
^^ Yes its easy, I bought mine used, so their was no hardware. I just used some double sided tape from Kragen, bolts, washers and locking nuts to install them.
#12
Registered User
Thread Starter
Join Date: Apr 2005
Location: San Jose, CA
Posts: 94
Car Info: 05 silver 2.5 RS
Originally Posted by danWrX
going to do mine this week, i think im going to use double sided tape, i hope it will work for me....
#13
Registered User
iTrader: (8)
Join Date: Sep 2004
Location: Honolulu
Posts: 579
Car Info: 09 WrX Pearl White 5dr hb / 04 Wrx White
just done mine this morning...i tried without double stick tape. so far its ok...the picture right now its dark.. but i will take more picture later...
Last edited by danWrX; 11-29-2005 at 01:48 AM.
#15
Registered User
iTrader: (8)
Join Date: Sep 2004
Location: Honolulu
Posts: 579
Car Info: 09 WrX Pearl White 5dr hb / 04 Wrx White
Originally Posted by Krinkov
wheres the cheapest place to buy splitter s and doglight covers on the net?