AUDT: Need a part/part number.
#16
Thread Starter
Chicks dig me. April Fool's!
iTrader: (31)
Joined: Apr 2006
Posts: 10,989
From: Fremont, CA
Car Info: 1997 Impreza, 2014 BRZ
I should give that a try. I should just bring in the other side that should be okay. Everything would just have been fine if I left my 20mm on, but I kind of needed the extra rotation... so jumped up to 22mm.
#17
if you're going to source for a m12 x 1.25 you're going to be very limited in terms of length. most hardware stores dont even carry that metric sized bolt
Then places like osh, who does carry it, have it in very short lengths like 20mm.
Then places like osh, who does carry it, have it in very short lengths like 20mm.
#18
Registered User
iTrader: (14)
Joined: Jun 2006
Posts: 733
From: Woodside, CA
Car Info: 1994 impreza L
12x1.25 is pretty big, this is a small-ish bolt we're talking about here. like, 6mm status.
For reference, the RSB attaches to the endlinks with a 12mm bolt. Kev is talking about the bolt that secures the RSB clamp to the RSB mount. For you nancy-boys with the stock mounts still, it is that black piece of garbage attached to your RSB!
BTW, kev, I do have the WRX bolts. They should be the same, and I bet I can mail it to you for free too!
let me know!
For reference, the RSB attaches to the endlinks with a 12mm bolt. Kev is talking about the bolt that secures the RSB clamp to the RSB mount. For you nancy-boys with the stock mounts still, it is that black piece of garbage attached to your RSB!
BTW, kev, I do have the WRX bolts. They should be the same, and I bet I can mail it to you for free too!
let me know!
#19
Thread Starter
Chicks dig me. April Fool's!
iTrader: (31)
Joined: Apr 2006
Posts: 10,989
From: Fremont, CA
Car Info: 1997 Impreza, 2014 BRZ
12x1.25 is pretty big, this is a small-ish bolt we're talking about here. like, 6mm status.
For reference, the RSB attaches to the endlinks with a 12mm bolt. Kev is talking about the bolt that secures the RSB clamp to the RSB mount. For you nancy-boys with the stock mounts still, it is that black piece of garbage attached to your RSB!
BTW, kev, I do have the WRX bolts. They should be the same, and I bet I can mail it to you for free too!
let me know!
For reference, the RSB attaches to the endlinks with a 12mm bolt. Kev is talking about the bolt that secures the RSB clamp to the RSB mount. For you nancy-boys with the stock mounts still, it is that black piece of garbage attached to your RSB!
BTW, kev, I do have the WRX bolts. They should be the same, and I bet I can mail it to you for free too!
let me know!
-Kevin
#21
Thread Starter
Chicks dig me. April Fool's!
iTrader: (31)
Joined: Apr 2006
Posts: 10,989
From: Fremont, CA
Car Info: 1997 Impreza, 2014 BRZ
Thanks Roo. I was going to call you this afternoon to get the number, but I guess you beat me to it.
darkonion <--- in class, can't (more like shouldn't) make phone calls.
darkonion <--- in class, can't (more like shouldn't) make phone calls.
Thread
Thread Starter
Forum
Replies
Last Post
esousa22
Engine/Power - EJ20T (pre-2006 WRX and JDM)
6
11-28-2013 03:52 AM
RIP99RS
Subaru General
4
10-11-2007 09:10 AM