ARGH!! Anyone know how to extract a broken 14mm bolt?
#16
I've had the same prob on my GM knuckle. Give an extractor a shot first, however in my case it broke off inside the bolt I was trying to get out... Or just drill it out completely and use a bolt with a locking nut on the other side, completely bypassing the threads in the knuckle.
#17
Forester Specialist
iTrader: (3)
Join Date: Jan 2003
Location: Sonoma County
Posts: 3,985
Car Info: '98/'04 Foresters (S & XT)
I wish you'd have contacted me - I had to remove those very bolts when I installed a steering rack and a bump-steer kit in my Forester. Definitely get an extractor kit, and use some PB blaster lubricant. If you have to do the other side, just remember to take the 14 off first and pull the ball joint out. It's easier that way.
#18
Registered User
Thread Starter
iTrader: (3)
Join Date: Nov 2006
Location: Daly City/ Davis
Posts: 708
Car Info: Drove a Cavalier with a WRX body kit
I wish you'd have contacted me - I had to remove those very bolts when I installed a steering rack and a bump-steer kit in my Forester. Definitely get an extractor kit, and use some PB blaster lubricant. If you have to do the other side, just remember to take the 14 off first and pull the ball joint out. It's easier that way.
Currently when I have time off from work I have been "PB"ing the broken half. Thankfully it was only the passenger side wheel bearing.
#19
Registered User
Thread Starter
iTrader: (3)
Join Date: Nov 2006
Location: Daly City/ Davis
Posts: 708
Car Info: Drove a Cavalier with a WRX body kit
Got my Bolts in the mail thanks for the recommendation Erick!
Being sent from 42 Autosports.
Extractor and broken bolt..... Challenge Accepted
Just got to stop by sears this Friday.
Being sent from 42 Autosports.
Extractor and broken bolt..... Challenge Accepted
Just got to stop by sears this Friday.
#20
Registered User
Join Date: Jul 2009
Location: Universal Technical Institute, Sac
Posts: 2,073
Car Info: Koenigsegg CCX
if theres any part of the bolt you can get to... like whats sticking out some shoot it with penetrating oil, let it sit, shoot it again then tap on it. tap in the direction the bolt comes out. and continue to shoot oil on it... happened with my downpipe and i even broke off the extracting bolts off...
Thread
Thread Starter
Forum
Replies
Last Post
Imprezer
Suby Shopping & Maintenance/Warranty
10
06-28-2004 01:24 PM