2002 WRX intermittently not starting,
#1
VIP Member
Thread Starter
iTrader: (17)
Join Date: May 2005
Location: Sunnyvale, CA
Posts: 22,776
Car Info: '13 BRZ Limited / '02 WRX
2002 WRX intermittently not starting,
For the second time since Friday my car didn't want to start this evening. I'll turn the key and it'll give that single click, and then nothing. Last time I got out and checked the battery cables, one was loose so I tightened it and then it worked. This time the cables were tight, but when I got back in it started.
Battery is less than one month old. Car has 135k miles on it, 2002 WRX. Any ideas?
Battery is less than one month old. Car has 135k miles on it, 2002 WRX. Any ideas?
#7
Registered User
iTrader: (11)
Join Date: Jan 2008
Location: Cheesesteakville
Posts: 6,833
Car Info: 05 wrx wagon, 90 celica alltrac, 66 mustang
A terminal cleaner is cheap. I keep one in my car. Do you have a multimeter? Just to rule out a charging problem. Running should be >13v sitting should be around 12v and cranking should be no lower than about 10v.
Hope you get it sorted out.
Hope you get it sorted out.
#11
General Pimpin'
iTrader: (7)
bah. no one ever does.
Take it back to the body shop dude.
My guess is that the whack you took transferred up to your starter. Hopefully it's the starter and not a chunk out of your flywheel or a bend somewhere.
If you're getting that click it's not the battery. It's the starter. So take it back in and let them pull the starter out and take a look. It could just be that the wire down on the starter is loose, frayed or just off. It only takes a slight contact to fire the starter so if it's dangling it can start occasionally.
Take it back to the body shop dude.
My guess is that the whack you took transferred up to your starter. Hopefully it's the starter and not a chunk out of your flywheel or a bend somewhere.
If you're getting that click it's not the battery. It's the starter. So take it back in and let them pull the starter out and take a look. It could just be that the wire down on the starter is loose, frayed or just off. It only takes a slight contact to fire the starter so if it's dangling it can start occasionally.
#12
Registered User
iTrader: (3)
Join Date: Aug 2004
Location: Berkeley, CA
Posts: 1,316
Car Info: 05' WRX (Dirty Black)
i have a similar problem on my 05. i get no click at all when i turn the key though. then after a 3rd or 4th try it will start right up. it's really intermittent, like once or twice a week. i suspected the starter but wanted to rule out the battery first. bought a cleaning kit and it seemed to go away, but now it seems to be back. guess there will be a starter install in my near future.
Last edited by turfshark; 03-13-2012 at 10:15 AM.
#13
General Pimpin'
iTrader: (7)
i have a similar problem on my 05. i get no click at all when i turn the key though. then after a 3rd or 4th try it will start right up. it's really intermittent, like once or twice a week. i suspected the starter but wanted to rule out the battery first. bought a cleaning kit and it seemed to go away, but now it seems to be back. guess there will be a starter install in my near future.
#14
If in doubt, FLAT OUT
iTrader: (33)
Join Date: Oct 2010
Location: Nor Cal SJ
Posts: 7,039
Car Info: 2010 Hatch, 2011 Sedan
Yeah, that should be checked too, but he said he had previously checked the cables. No, it doesn't hurt to check that, but when it doesn't click and then does, there's about a 90% chance it is the starter. Cleaning and maintaining your battery and cables is something that should be done regularly (at least once a year, more often if you live somewhere where corrosion is an issue) whether your car has starting issues or not.
My truck had almost the exact same thing. I bought a new battery and when I went to swap them, I found the main positive cable corroded and loose. Cleaned it all up and problem solved. But when it wouldn't start, there was no click at all.
My truck had almost the exact same thing. I bought a new battery and when I went to swap them, I found the main positive cable corroded and loose. Cleaned it all up and problem solved. But when it wouldn't start, there was no click at all.